Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Compact grey metal power supply unit with side ventilation slots and screw terminals

myVolts

myVolts SDP06-24-100T 24-28V 0.6A power supply

SKU CH-H4X7-5XVEA

Compact AT power supply delivering 24-28 V DC at 0.6 A from 85-264 V AC input, NEC Class 2 limited

  • TypeAT
  • Wide 85-264 V AC input handles global mains
  • NEC Class 2 current limiting protects against overloads
  • Compact 2.95 x 0.90 x 3.80 inch footprint saves space
  • 24-28 V DC adjustable output suits varied loads

Compact DIN-rail supply for low-current 24 V systems

This myVolts SDP06-24-100T unit delivers 24-28 V DC at 0.6 A from a universal 85-264 V AC or 90-375 V DC input. The 47-63 Hz single-phase design fits a 2.95 x 0.90 x 3.80 inch footprint and carries NEC Class 2 current-limited protection. It suits automation panels, sensor arrays and similar loads that need a steady, regulated rail without forced-air cooling.

Steady output under continuous 0.6 A draw

Because the supply is rated for the full 0.6 A continuously, voltage remains within the 24-28 V window during prolonged operation rather than sagging after a short burst. The wide input range absorbs mains fluctuation without triggering shutdown, and the Class 2 limit prevents fault currents from damaging downstream wiring. Installers should verify that the load never exceeds the rated current, as the unit has no parallel or redundancy provision.

Privalumai

  • Wide 85-264 V AC input handles global mains
  • NEC Class 2 current limiting protects against overloads
  • Compact 2.95 x 0.90 x 3.80 inch footprint saves space
  • 24-28 V DC adjustable output suits varied loads

Specifikacijos

TypeAT

Klausimai apie šią prekę

How much heat and noise does the SDP06-24-100T produce when running continuously?

The unit is a low-power 0.6 A supply with no fan, so it runs silently and generates only modest warmth during all-day operation.

What input wiring or connectors must I already have to install this power supply?

You need a 1-phase AC source between 85 and 264 V (or 90–375 V DC) and wiring suitable for the 2.95" × 0.90" × 3.80" chassis.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.