Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Compact grey metal power supply unit with side ventilation slots and screw terminals

myVolts

myVolts SDP06-24-100T 24-28V 0.6A power supply

SKU CH-H4X7-5XVEA

Compact AT power supply delivering 24-28 V DC at 0.6 A from 85-264 V AC input, NEC Class 2 limited

  • TypeAT
  • Wide 85-264 V AC input handles global mains
  • NEC Class 2 current limiting protects against overloads
  • Compact 2.95 x 0.90 x 3.80 inch footprint saves space
  • 24-28 V DC adjustable output suits varied loads

Compact DIN-rail supply for low-current 24 V systems

This myVolts SDP06-24-100T unit delivers 24-28 V DC at 0.6 A from a universal 85-264 V AC or 90-375 V DC input. The 47-63 Hz single-phase design fits a 2.95 x 0.90 x 3.80 inch footprint and carries NEC Class 2 current-limited protection. It suits automation panels, sensor arrays and similar loads that need a steady, regulated rail without forced-air cooling.

Steady output under continuous 0.6 A draw

Because the supply is rated for the full 0.6 A continuously, voltage remains within the 24-28 V window during prolonged operation rather than sagging after a short burst. The wide input range absorbs mains fluctuation without triggering shutdown, and the Class 2 limit prevents fault currents from damaging downstream wiring. Installers should verify that the load never exceeds the rated current, as the unit has no parallel or redundancy provision.

Puncte forte

  • Wide 85-264 V AC input handles global mains
  • NEC Class 2 current limiting protects against overloads
  • Compact 2.95 x 0.90 x 3.80 inch footprint saves space
  • 24-28 V DC adjustable output suits varied loads

Specificații

TypeAT

Întrebări despre acest articol

How much heat and noise does the SDP06-24-100T produce when running continuously?

The unit is a low-power 0.6 A supply with no fan, so it runs silently and generates only modest warmth during all-day operation.

What input wiring or connectors must I already have to install this power supply?

You need a 1-phase AC source between 85 and 264 V (or 90–375 V DC) and wiring suitable for the 2.95" × 0.90" × 3.80" chassis.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.