Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Compact grey metal power supply unit with side ventilation slots and screw terminals

myVolts

myVolts SDP06-24-100T 24-28V 0.6A power supply

SKU CH-H4X7-5XVEA

Compact AT power supply delivering 24-28 V DC at 0.6 A from 85-264 V AC input, NEC Class 2 limited

  • TypeAT
  • Wide 85-264 V AC input handles global mains
  • NEC Class 2 current limiting protects against overloads
  • Compact 2.95 x 0.90 x 3.80 inch footprint saves space
  • 24-28 V DC adjustable output suits varied loads

Compact DIN-rail supply for low-current 24 V systems

This myVolts SDP06-24-100T unit delivers 24-28 V DC at 0.6 A from a universal 85-264 V AC or 90-375 V DC input. The 47-63 Hz single-phase design fits a 2.95 x 0.90 x 3.80 inch footprint and carries NEC Class 2 current-limited protection. It suits automation panels, sensor arrays and similar loads that need a steady, regulated rail without forced-air cooling.

Steady output under continuous 0.6 A draw

Because the supply is rated for the full 0.6 A continuously, voltage remains within the 24-28 V window during prolonged operation rather than sagging after a short burst. The wide input range absorbs mains fluctuation without triggering shutdown, and the Class 2 limit prevents fault currents from damaging downstream wiring. Installers should verify that the load never exceeds the rated current, as the unit has no parallel or redundancy provision.

Pluspunten

  • Wide 85-264 V AC input handles global mains
  • NEC Class 2 current limiting protects against overloads
  • Compact 2.95 x 0.90 x 3.80 inch footprint saves space
  • 24-28 V DC adjustable output suits varied loads

Specificaties

TypeAT

Vragen over dit artikel

How much heat and noise does the SDP06-24-100T produce when running continuously?

The unit is a low-power 0.6 A supply with no fan, so it runs silently and generates only modest warmth during all-day operation.

What input wiring or connectors must I already have to install this power supply?

You need a 1-phase AC source between 85 and 264 V (or 90–375 V DC) and wiring suitable for the 2.95" × 0.90" × 3.80" chassis.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.