Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1600 CL11 1.35V 240-pin UDIMM desktop RAM

SKU CH-2JSE-A8J5P

A dual-channel 8 GB DDR3 kit running at 1600 MHz with CL11 latency and 1.35 V operation for desktop upgrades

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo

Capacity 8GB (2 x 4GB)

  • Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
  • DDR3 1600 speed (PC3-12800) delivers responsive desktop performance
  • CL11 latency keeps data access quick for everyday workloads
  • 35 V low-voltage operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop motherboards

NEMIX RAM DDR3 8GB Kit

This NEMIX RAM kit supplies 8 GB of DDR3 desktop memory as two 4 GB UDIMM modules. It runs at 1600 MT/s with a CAS latency of CL11. The sticks operate at 1.35 V and use the standard 240-pin unbuffered, non-ECC layout. No heat spreaders are fitted.

Suitability check

The kit suits older DDR3 motherboards that accept 1.35 V low-voltage DIMMs and do not require ECC or registered memory. Systems needing ECC, registered modules, or a different voltage should look at other parts. Builders using newer DDR5 platforms cannot use this memory.

Deciding specification

The 1.35 V operating voltage is the single figure that decides compatibility. If the board only supports 1.5 V DIMMs, these modules may not be recognised or may run outside specification. Verify the motherboard manual before purchase.

Privalumai

  • Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
  • DDR3 1600 speed (PC3-12800) delivers responsive desktop performance
  • CL11 latency keeps data access quick for everyday workloads
  • 35 V low-voltage operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop motherboards

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD12800-428LK2
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will this kit run at 1.35 V or does it need 1.5 V?

The modules are rated at 1.35 V, while the supplier title also lists 1.5 V; most motherboards will default to the higher voltage and the memory will still operate at DDR3 1600 CL11.

Is the kit compatible with a motherboard that has four 240-pin slots?

Yes, each stick is a standard 240-pin DDR3 UDIMM, so you can populate any two slots; check the board manual for the recommended pair for dual-channel mode.

Does the lack of a heat spreader affect stability?

No, these are unbuffered non-ECC modules without spreaders; they are designed to run within JEDEC thermal limits at CL11 without additional cooling.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.