Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR3 UDIMM sticks, no heat spreaders, 240-pin

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1600 CL11 1.35V 240-pin UDIMM desktop RAM

SKU CH-2JSE-A8J5P

A dual-channel 8 GB DDR3 kit running at 1600 MHz with CL11 latency and 1.35 V operation for desktop upgrades

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo

Capacity 8GB (2 x 4GB)

  • Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
  • DDR3 1600 speed (PC3-12800) delivers responsive desktop performance
  • CL11 latency keeps data access quick for everyday workloads
  • 35 V low-voltage operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop motherboards

NEMIX RAM DDR3 8GB Kit

This NEMIX RAM kit supplies 8 GB of DDR3 desktop memory as two 4 GB UDIMM modules. It runs at 1600 MT/s with a CAS latency of CL11. The sticks operate at 1.35 V and use the standard 240-pin unbuffered, non-ECC layout. No heat spreaders are fitted.

Suitability check

The kit suits older DDR3 motherboards that accept 1.35 V low-voltage DIMMs and do not require ECC or registered memory. Systems needing ECC, registered modules, or a different voltage should look at other parts. Builders using newer DDR5 platforms cannot use this memory.

Deciding specification

The 1.35 V operating voltage is the single figure that decides compatibility. If the board only supports 1.5 V DIMMs, these modules may not be recognised or may run outside specification. Verify the motherboard manual before purchase.

Pluspunten

  • Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
  • DDR3 1600 speed (PC3-12800) delivers responsive desktop performance
  • CL11 latency keeps data access quick for everyday workloads
  • 35 V low-voltage operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop motherboards

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD12800-428LK2
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this kit run at 1.35 V or does it need 1.5 V?

The modules are rated at 1.35 V, while the supplier title also lists 1.5 V; most motherboards will default to the higher voltage and the memory will still operate at DDR3 1600 CL11.

Is the kit compatible with a motherboard that has four 240-pin slots?

Yes, each stick is a standard 240-pin DDR3 UDIMM, so you can populate any two slots; check the board manual for the recommended pair for dual-channel mode.

Does the lack of a heat spreader affect stability?

No, these are unbuffered non-ECC modules without spreaders; they are designed to run within JEDEC thermal limits at CL11 without additional cooling.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.