Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green DDR3 UDIMM sticks, no heat spreaders, 240-pin

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1600 CL11 1.35V 240-pin UDIMM desktop RAM

SKU CH-2JSE-A8J5P

A dual-channel 8 GB DDR3 kit running at 1600 MHz with CL11 latency and 1.35 V operation for desktop upgrades

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo

Capacity 8GB (2 x 4GB)

  • Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
  • DDR3 1600 speed (PC3-12800) delivers responsive desktop performance
  • CL11 latency keeps data access quick for everyday workloads
  • 35 V low-voltage operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop motherboards

NEMIX RAM DDR3 8GB Kit

This NEMIX RAM kit supplies 8 GB of DDR3 desktop memory as two 4 GB UDIMM modules. It runs at 1600 MT/s with a CAS latency of CL11. The sticks operate at 1.35 V and use the standard 240-pin unbuffered, non-ECC layout. No heat spreaders are fitted.

Suitability check

The kit suits older DDR3 motherboards that accept 1.35 V low-voltage DIMMs and do not require ECC or registered memory. Systems needing ECC, registered modules, or a different voltage should look at other parts. Builders using newer DDR5 platforms cannot use this memory.

Deciding specification

The 1.35 V operating voltage is the single figure that decides compatibility. If the board only supports 1.5 V DIMMs, these modules may not be recognised or may run outside specification. Verify the motherboard manual before purchase.

Pontos fortes

  • Dual-channel 8 GB kit boosts multitasking with two matched 4 GB modules
  • DDR3 1600 speed (PC3-12800) delivers responsive desktop performance
  • CL11 latency keeps data access quick for everyday workloads
  • 35 V low-voltage operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop motherboards

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD12800-428LK2
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Will this kit run at 1.35 V or does it need 1.5 V?

The modules are rated at 1.35 V, while the supplier title also lists 1.5 V; most motherboards will default to the higher voltage and the memory will still operate at DDR3 1600 CL11.

Is the kit compatible with a motherboard that has four 240-pin slots?

Yes, each stick is a standard 240-pin DDR3 UDIMM, so you can populate any two slots; check the board manual for the recommended pair for dual-channel mode.

Does the lack of a heat spreader affect stability?

No, these are unbuffered non-ECC modules without spreaders; they are designed to run within JEDEC thermal limits at CL11 without additional cooling.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.