NEMIX RAM 4GB DDR3 1600 PC3-12800 1.35V 204-Pin SODIMM Laptop RAM
- 4GB
- 204-Pin DDR3 SO-DIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
A dual-channel 8 GB DDR3 kit running at 1600 MHz with CL11 latency and 1.35 V operation for desktop upgrades
Capacity 8GB (2 x 4GB)
This NEMIX RAM kit supplies 8 GB of DDR3 desktop memory as two 4 GB UDIMM modules. It runs at 1600 MT/s with a CAS latency of CL11. The sticks operate at 1.35 V and use the standard 240-pin unbuffered, non-ECC layout. No heat spreaders are fitted.
The kit suits older DDR3 motherboards that accept 1.35 V low-voltage DIMMs and do not require ECC or registered memory. Systems needing ECC, registered modules, or a different voltage should look at other parts. Builders using newer DDR5 platforms cannot use this memory.
The 1.35 V operating voltage is the single figure that decides compatibility. If the board only supports 1.5 V DIMMs, these modules may not be recognised or may run outside specification. Verify the motherboard manual before purchase.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR3 Desktop PC Memory Solutions |
| Part Number | MD12800-428LK2 |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 UDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The modules are rated at 1.35 V, while the supplier title also lists 1.5 V; most motherboards will default to the higher voltage and the memory will still operate at DDR3 1600 CL11.
Yes, each stick is a standard 240-pin DDR3 UDIMM, so you can populate any two slots; check the board manual for the recommended pair for dual-channel mode.
No, these are unbuffered non-ECC modules without spreaders; they are designed to run within JEDEC thermal limits at CL11 without additional cooling.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?