Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 UDIMM module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 1.35V 240-Pin Desktop RAM

SKU CH-9VPM-FBA6P

A 4 GB DDR3 desktop module rated at 1333 MT/s with CL9 latency and a 1.50 V operating voltage

  • Capacity4GB
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 4GB

  • Low-voltage 1.35V operation reduces power draw
  • 4GB DDR3 1333MHz module boosts desktop responsiveness
  • CL9 latency supports smooth multitasking
  • Major OEM chips ensure broad motherboard compatibility
  • Unbuffered non-ECC design suits standard PC builds

NEMIX RAM 4GB DDR3 1333 UDIMM

This NEMIX RAM module provides 4GB of DDR3 memory rated at 1333 MHz with a PC3-10600 classification. It uses a 240-pin UDIMM form factor and operates at 1.50V with CL9 latency. The stick is non-ECC and unbuffered, built with chips from major OEM suppliers such as Samsung, Micron, or Hynix. No heat spreader is included.

Suits older DDR3 desktops needing a basic 4GB

This module fits standard desktop motherboards that accept 240-pin DDR3 UDIMMs running at 1.50V. It is not suitable for systems that require ECC error correction, registered buffering, or 1.35V low-voltage operation. Buyers with laptops or small-form-factor boards using SO-DIMM slots must choose a different form factor.

Key spec: 1.50V DDR3 1333 240-pin non-ECC UDIMM

The decisive specification is the combination of 1.50V voltage, DDR3 1333 speed, 240-pin UDIMM layout, and non-ECC unbuffered design. Your motherboard must match all four of these parameters for the module to function correctly. Verify the board manual before purchase.

Pluspunten

  • Low-voltage 1.35V operation reduces power draw
  • 4GB DDR3 1333MHz module boosts desktop responsiveness
  • CL9 latency supports smooth multitasking
  • Major OEM chips ensure broad motherboard compatibility
  • Unbuffered non-ECC design suits standard PC builds

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-428LK1
Capacity4GB
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What speed does the DDR3 1333 PC3-10600 interface cap at in practice?

The module runs at 1333 MT/s with a PC3-10600 bandwidth rating and CL9 latency.

What physical slot and clearance does the 240-pin UDIMM need to fit?

It requires a standard 240-pin DDR3 desktop DIMM slot and has no heat spreader for tight clearances.

How is the 1.35 V or 1.50 V module installed, and what step is often missed?

Align the notch, press firmly until both retention clips click, then verify the BIOS detects 4 GB at the rated speed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.