Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 80mm square cooling fan with three wires

OEM Industries

OEM Industries 8414N/2H 80mm 24V 2.4W Ball Bearing Fan

SKU CH-ZY0T-5XHQ7

An 80 mm ball-bearing fan running at 24 V and 2.4 W with a three-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • LEDNo
  • 80 mm frame fits standard CPU cooler mounts
  • Ball bearing design extends operational lifespan
  • 24 V 2.4 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 25 mm thickness suits slim chassis builds

80 mm 24 V Ball-Bearing Cooling Fan

The OEM Industries 8414N/2H is an 80 by 25 mm axial fan designed for 24 V DC systems. It draws 2.4 W and uses a three-wire connection for speed monitoring. The ball-bearing construction suits continuous operation in industrial or embedded enclosures.

Three-Wire 24 V Interface Limits

The fan requires a stable 24 V supply and a header that can read the tachometer signal on the third wire. Two-wire headers will run the motor but provide no speed feedback. Voltages outside the rated 24 V are not supported by the supplied specifications.

Ball Bearing Determines Service Life

The ball-bearing design is the single specification that decides suitability for long-term or high-temperature deployments. Sleeve-bearing alternatives are not offered in this model. Buyers needing a different bearing type or a different voltage must select another part.

Privalumai

  • 80 mm frame fits standard CPU cooler mounts
  • Ball bearing design extends operational lifespan
  • 24 V 2.4 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 25 mm thickness suits slim chassis builds

Specifikacijos

Model8414N/2H
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
LEDNo

Klausimai apie šią prekę

Which 80 mm ball-bearing fan should I pick for a 24 V supply?

The 8414N/2H model runs at 24 V and draws 2.4 W, matching that voltage exactly.

What does the 2.4 W rating mean once the fan is installed?

It shows the maximum power the motor will pull from a 24 V rail under normal load.

What does the three-wire connection provide in practice?

The third wire carries a tachometer signal so the system can monitor fan speed.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.