Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Black 80mm square cooling fan with three wires

OEM Industries

OEM Industries 8414N/2H 80mm 24V 2.4W Ball Bearing Fan

SKU CH-ZY0T-5XHQ7

An 80 mm ball-bearing fan running at 24 V and 2.4 W with a three-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • LEDNo
  • 80 mm frame fits standard CPU cooler mounts
  • Ball bearing design extends operational lifespan
  • 24 V 2.4 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 25 mm thickness suits slim chassis builds

80 mm 24 V Ball-Bearing Cooling Fan

The OEM Industries 8414N/2H is an 80 by 25 mm axial fan designed for 24 V DC systems. It draws 2.4 W and uses a three-wire connection for speed monitoring. The ball-bearing construction suits continuous operation in industrial or embedded enclosures.

Three-Wire 24 V Interface Limits

The fan requires a stable 24 V supply and a header that can read the tachometer signal on the third wire. Two-wire headers will run the motor but provide no speed feedback. Voltages outside the rated 24 V are not supported by the supplied specifications.

Ball Bearing Determines Service Life

The ball-bearing design is the single specification that decides suitability for long-term or high-temperature deployments. Sleeve-bearing alternatives are not offered in this model. Buyers needing a different bearing type or a different voltage must select another part.

Fordele

  • 80 mm frame fits standard CPU cooler mounts
  • Ball bearing design extends operational lifespan
  • 24 V 2.4 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 25 mm thickness suits slim chassis builds

Specifikationer

Model8414N/2H
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
LEDNo

Spørgsmål om denne vare

Which 80 mm ball-bearing fan should I pick for a 24 V supply?

The 8414N/2H model runs at 24 V and draws 2.4 W, matching that voltage exactly.

What does the 2.4 W rating mean once the fan is installed?

It shows the maximum power the motor will pull from a 24 V rail under normal load.

What does the three-wire connection provide in practice?

The third wire carries a tachometer signal so the system can monitor fan speed.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.