Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 80mm square cooling fan with three wires

OEM Industries

OEM Industries 8414N/2H 80mm 24V 2.4W Ball Bearing Fan

SKU CH-ZY0T-5XHQ7

An 80 mm ball-bearing fan running at 24 V and 2.4 W with a three-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • LEDNo
  • 80 mm frame fits standard CPU cooler mounts
  • Ball bearing design extends operational lifespan
  • 24 V 2.4 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 25 mm thickness suits slim chassis builds

80 mm 24 V Ball-Bearing Cooling Fan

The OEM Industries 8414N/2H is an 80 by 25 mm axial fan designed for 24 V DC systems. It draws 2.4 W and uses a three-wire connection for speed monitoring. The ball-bearing construction suits continuous operation in industrial or embedded enclosures.

Three-Wire 24 V Interface Limits

The fan requires a stable 24 V supply and a header that can read the tachometer signal on the third wire. Two-wire headers will run the motor but provide no speed feedback. Voltages outside the rated 24 V are not supported by the supplied specifications.

Ball Bearing Determines Service Life

The ball-bearing design is the single specification that decides suitability for long-term or high-temperature deployments. Sleeve-bearing alternatives are not offered in this model. Buyers needing a different bearing type or a different voltage must select another part.

Puncte forte

  • 80 mm frame fits standard CPU cooler mounts
  • Ball bearing design extends operational lifespan
  • 24 V 2.4 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 25 mm thickness suits slim chassis builds

Specificații

Model8414N/2H
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
LEDNo

Întrebări despre acest articol

Which 80 mm ball-bearing fan should I pick for a 24 V supply?

The 8414N/2H model runs at 24 V and draws 2.4 W, matching that voltage exactly.

What does the 2.4 W rating mean once the fan is installed?

It shows the maximum power the motor will pull from a 24 V rail under normal load.

What does the three-wire connection provide in practice?

The third wire carries a tachometer signal so the system can monitor fan speed.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.