Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 80mm square cooling fan with three wires

OEM Industries

OEM Industries 8414N/2H 80mm 24V 2.4W Ball Bearing Fan

SKU CH-ZY0T-5XHQ7

An 80 mm ball-bearing fan running at 24 V and 2.4 W with a three-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • LEDNo
  • 80 mm frame fits standard CPU cooler mounts
  • Ball bearing design extends operational lifespan
  • 24 V 2.4 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 25 mm thickness suits slim chassis builds

80 mm 24 V Ball-Bearing Cooling Fan

The OEM Industries 8414N/2H is an 80 by 25 mm axial fan designed for 24 V DC systems. It draws 2.4 W and uses a three-wire connection for speed monitoring. The ball-bearing construction suits continuous operation in industrial or embedded enclosures.

Three-Wire 24 V Interface Limits

The fan requires a stable 24 V supply and a header that can read the tachometer signal on the third wire. Two-wire headers will run the motor but provide no speed feedback. Voltages outside the rated 24 V are not supported by the supplied specifications.

Ball Bearing Determines Service Life

The ball-bearing design is the single specification that decides suitability for long-term or high-temperature deployments. Sleeve-bearing alternatives are not offered in this model. Buyers needing a different bearing type or a different voltage must select another part.

Priekšrocības

  • 80 mm frame fits standard CPU cooler mounts
  • Ball bearing design extends operational lifespan
  • 24 V 2.4 W rating keeps power draw low
  • Three-wire connector enables speed monitoring
  • 25 mm thickness suits slim chassis builds

Specifikācijas

Model8414N/2H
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
LEDNo

Jautājumi par šo preci

Which 80 mm ball-bearing fan should I pick for a 24 V supply?

The 8414N/2H model runs at 24 V and draws 2.4 W, matching that voltage exactly.

What does the 2.4 W rating mean once the fan is installed?

It shows the maximum power the motor will pull from a 24 V rail under normal load.

What does the three-wire connection provide in practice?

The third wire carries a tachometer signal so the system can monitor fan speed.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.