Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

OEM Industries

OEM Industries FFB0912HH 90mm CPU cooler 12V 0.60A 3200 RPM 44.4 dBA 70.21 CFM

SKU CH-D6H3-BNM3W MPN FFB0912HH

A 90 mm fan with dual ball bearings spins at 3200 RPM to deliver 70.21 CFM airflow at 44.4 dBA from a 12 V, 0.60 A supply

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing Type2 Ball
  • Power Connector2 Wires
  • LEDNo
  • Dual ball bearings extend operational life
  • 3200 RPM delivers 70.21 CFM airflow for effective cooling
  • 92 mm square frame fits standard 90 mm mounts
  • 60 A draw at 12 V keeps power use low
  • 4 dBA noise level suits quiet builds

90 mm dual-ball-bearing CPU fan

The OEM Industries FFB0912HH is a 90 mm frame fan built for direct CPU cooler mounting. It runs on 12 V at 0.60 A and spins at 3200 RPM with a dual ball bearing for extended service life. No LED lighting or extra wiring is included.

Suits compact coolers needing high airflow

Builders fitting a 92 mm x 92 mm x 25 mm shroud or heatsink that demands 70.21 CFM will match the spec. Systems limited to 3-pin or 4-pin headers, or those requiring PWM control, should look at a different fan.

Simple two-wire installation

Connect the two leads to a 12 V source and the fan starts immediately. The only common issue is verifying that the motherboard or controller can supply 0.60 A on the header used.

Privalumai

  • Dual ball bearings extend operational life
  • 3200 RPM delivers 70.21 CFM airflow for effective cooling
  • 92 mm square frame fits standard 90 mm mounts
  • 60 A draw at 12 V keeps power use low
  • 4 dBA noise level suits quiet builds

Specifikacijos

ModelFFB0912HH
ColorBlack
TypeFan only
Fan Size90mm
Bearing Type2 Ball
Power Connector2 Wires
LEDNo

Klausimai apie šią prekę

What power source must I already have to run this 12 V 0.60 A fan?

You need a 12 V supply capable of at least 0.60 A, typically a motherboard fan header or a Molex adapter, because the fan draws 0.60 A on its two-wire lead.

Will the 92 mm frame fit the mounting holes on my existing 90 mm cooler bracket?

The fan measures 92 mm square, so it matches standard 92 mm mounting patterns; a 90 mm bracket will not align with the screw holes.

How can I confirm the fan is spinning at its rated 3200 RPM after installation?

Check the RPM reading in BIOS or a hardware-monitoring utility; it should report approximately 3200 RPM, allowing for the stated ±5 % tolerance.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.