OEM Industries
OEM Industries FFB0912HH 90mm CPU cooler 12V 0.60A 3200 RPM 44.4 dBA 70.21 CFM
A 90 mm fan with dual ball bearings spins at 3200 RPM to deliver 70.21 CFM airflow at 44.4 dBA from a 12 V, 0.60 A supply
- ColorBlack
- TypeFan only
- Fan Size90mm
- Bearing Type2 Ball
- Power Connector2 Wires
- LEDNo
- Dual ball bearings extend operational life
- 3200 RPM delivers 70.21 CFM airflow for effective cooling
- 92 mm square frame fits standard 90 mm mounts
- 60 A draw at 12 V keeps power use low
- 4 dBA noise level suits quiet builds
90 mm dual-ball-bearing CPU fan
The OEM Industries FFB0912HH is a 90 mm frame fan built for direct CPU cooler mounting. It runs on 12 V at 0.60 A and spins at 3200 RPM with a dual ball bearing for extended service life. No LED lighting or extra wiring is included.
Suits compact coolers needing high airflow
Builders fitting a 92 mm x 92 mm x 25 mm shroud or heatsink that demands 70.21 CFM will match the spec. Systems limited to 3-pin or 4-pin headers, or those requiring PWM control, should look at a different fan.
Simple two-wire installation
Connect the two leads to a 12 V source and the fan starts immediately. The only common issue is verifying that the motherboard or controller can supply 0.60 A on the header used.
Ciri-ciri utama
- Dual ball bearings extend operational life
- 3200 RPM delivers 70.21 CFM airflow for effective cooling
- 92 mm square frame fits standard 90 mm mounts
- 60 A draw at 12 V keeps power use low
- 4 dBA noise level suits quiet builds
Spesifikasi
| Model | FFB0912HH |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 90mm |
| Bearing Type | 2 Ball |
| Power Connector | 2 Wires |
| LED | No |
Soalan tentang produk ini
What power source must I already have to run this 12 V 0.60 A fan?
You need a 12 V supply capable of at least 0.60 A, typically a motherboard fan header or a Molex adapter, because the fan draws 0.60 A on its two-wire lead.
Will the 92 mm frame fit the mounting holes on my existing 90 mm cooler bracket?
The fan measures 92 mm square, so it matches standard 92 mm mounting patterns; a 90 mm bracket will not align with the screw holes.
How can I confirm the fan is spinning at its rated 3200 RPM after installation?
Check the RPM reading in BIOS or a hardware-monitoring utility; it should report approximately 3200 RPM, allowing for the stated ±5 % tolerance.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Thermal Grizzly TG-MP8-120-20-30-1R Minus Pad 8 chipset cooling 120x20x3.0mm
DOCTOR METAL 3x 120mm case fan pack white with controller
- Case Fan
- Case
DOCTOR METAL 120 mm case fan 3-pack with controller
- Case Fan
- Case



