Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OEM Industries

OEM Industries FFB0912HH 90mm CPU cooler 12V 0.60A 3200 RPM 44.4 dBA 70.21 CFM

SKU CH-D6H3-BNM3W MPN FFB0912HH

A 90 mm fan with dual ball bearings spins at 3200 RPM to deliver 70.21 CFM airflow at 44.4 dBA from a 12 V, 0.60 A supply

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing Type2 Ball
  • Power Connector2 Wires
  • LEDNo
  • Dual ball bearings extend operational life
  • 3200 RPM delivers 70.21 CFM airflow for effective cooling
  • 92 mm square frame fits standard 90 mm mounts
  • 60 A draw at 12 V keeps power use low
  • 4 dBA noise level suits quiet builds

90 mm dual-ball-bearing CPU fan

The OEM Industries FFB0912HH is a 90 mm frame fan built for direct CPU cooler mounting. It runs on 12 V at 0.60 A and spins at 3200 RPM with a dual ball bearing for extended service life. No LED lighting or extra wiring is included.

Suits compact coolers needing high airflow

Builders fitting a 92 mm x 92 mm x 25 mm shroud or heatsink that demands 70.21 CFM will match the spec. Systems limited to 3-pin or 4-pin headers, or those requiring PWM control, should look at a different fan.

Simple two-wire installation

Connect the two leads to a 12 V source and the fan starts immediately. The only common issue is verifying that the motherboard or controller can supply 0.60 A on the header used.

Kohokohdat

  • Dual ball bearings extend operational life
  • 3200 RPM delivers 70.21 CFM airflow for effective cooling
  • 92 mm square frame fits standard 90 mm mounts
  • 60 A draw at 12 V keeps power use low
  • 4 dBA noise level suits quiet builds

Tekniset tiedot

ModelFFB0912HH
ColorBlack
TypeFan only
Fan Size90mm
Bearing Type2 Ball
Power Connector2 Wires
LEDNo

Kysymyksiä tästä tuotteesta

What power source must I already have to run this 12 V 0.60 A fan?

You need a 12 V supply capable of at least 0.60 A, typically a motherboard fan header or a Molex adapter, because the fan draws 0.60 A on its two-wire lead.

Will the 92 mm frame fit the mounting holes on my existing 90 mm cooler bracket?

The fan measures 92 mm square, so it matches standard 92 mm mounting patterns; a 90 mm bracket will not align with the screw holes.

How can I confirm the fan is spinning at its rated 3200 RPM after installation?

Check the RPM reading in BIOS or a hardware-monitoring utility; it should report approximately 3200 RPM, allowing for the stated ±5 % tolerance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.