저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black 90mm square cooling fan, 25mm thick, two-wire power lead

OEM Industries

OEM Industries FFB0912HH 90mm CPU cooler 12V 0.60A 3200 RPM 44.4 dBA 70.21 CFM

SKU CH-D6H3-BNM3W MPN FFB0912HH

A 90 mm fan with dual ball bearings spins at 3200 RPM to deliver 70.21 CFM airflow at 44.4 dBA from a 12 V, 0.60 A supply

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing Type2 Ball
  • Power Connector2 Wires
  • LEDNo
  • Dual ball bearings extend operational life
  • 3200 RPM delivers 70.21 CFM airflow for effective cooling
  • 92 mm square frame fits standard 90 mm mounts
  • 60 A draw at 12 V keeps power use low
  • 4 dBA noise level suits quiet builds

90 mm dual-ball-bearing CPU fan

The OEM Industries FFB0912HH is a 90 mm frame fan built for direct CPU cooler mounting. It runs on 12 V at 0.60 A and spins at 3200 RPM with a dual ball bearing for extended service life. No LED lighting or extra wiring is included.

Suits compact coolers needing high airflow

Builders fitting a 92 mm x 92 mm x 25 mm shroud or heatsink that demands 70.21 CFM will match the spec. Systems limited to 3-pin or 4-pin headers, or those requiring PWM control, should look at a different fan.

Simple two-wire installation

Connect the two leads to a 12 V source and the fan starts immediately. The only common issue is verifying that the motherboard or controller can supply 0.60 A on the header used.

주요 특징

  • Dual ball bearings extend operational life
  • 3200 RPM delivers 70.21 CFM airflow for effective cooling
  • 92 mm square frame fits standard 90 mm mounts
  • 60 A draw at 12 V keeps power use low
  • 4 dBA noise level suits quiet builds

사양

ModelFFB0912HH
ColorBlack
TypeFan only
Fan Size90mm
Bearing Type2 Ball
Power Connector2 Wires
LEDNo

이 상품에 대한 질문

What power source must I already have to run this 12 V 0.60 A fan?

You need a 12 V supply capable of at least 0.60 A, typically a motherboard fan header or a Molex adapter, because the fan draws 0.60 A on its two-wire lead.

Will the 92 mm frame fit the mounting holes on my existing 90 mm cooler bracket?

The fan measures 92 mm square, so it matches standard 92 mm mounting patterns; a 90 mm bracket will not align with the screw holes.

How can I confirm the fan is spinning at its rated 3200 RPM after installation?

Check the RPM reading in BIOS or a hardware-monitoring utility; it should report approximately 3200 RPM, allowing for the stated ±5 % tolerance.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.