Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 9 cm square frame fan with three-wire connector

OEM Industries

OEM Industries MMF-09D24TS RM9 9CM 24V 0.19A 3 Pin Fan

SKU CH-QDE1-KNQAY

A 9 cm dual-ball-bearing fan delivering 24 V airflow for YASKAWA and ABB inverter systems

  • ColorBlack
  • TypeFan only
  • Fan Size9CM
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • LEDNo
  • Reliable dual-ball bearing extends service life
  • 90×25 mm frame fits standard 9 cm mounts
  • 24 V 0.19 A draw suits inverter power supplies
  • Three-pin connector provides tachometer feedback for monitoring
  • Designed for Yaskawa PLC and ABB equipment

Industrial inverter cooling fan

The OEM Industries MMF-09D24TS RM9 is a 9 cm square frame fan built for 24 V DC industrial equipment. It targets engineers maintaining YASKAWA or ABB PLC inverter cabinets where a direct replacement is required.

Dual ball bearing and three wire lead

Black plastic housing measures 90 by 25 mm and uses a two ball bearing design for continuous duty cycles. A three pin connector supplies power and tachometer feedback to the inverter controller.

Verify voltage and mounting before ordering

Confirm the host unit runs on 24 V DC and draws no more than 0.19 A at the fan header. Check that the 90 mm screw pattern and three pin keying match the existing cutout and header orientation.

Privalumai

  • Reliable dual-ball bearing extends service life
  • 90×25 mm frame fits standard 9 cm mounts
  • 24 V 0.19 A draw suits inverter power supplies
  • Three-pin connector provides tachometer feedback for monitoring
  • Designed for Yaskawa PLC and ABB equipment

Specifikacijos

ModelMMF-09D24TS RM9
ColorBlack
TypeFan only
Fan Size9CM
Bearing Type2 Ball
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

What voltage and current does the 3-pin connector on the MMF-09D24TS RM9 require?

The fan runs on 24 V and draws 0.19 A through its three-pin power connector.

Will the 90 mm by 25 mm frame fit my 9 cm mounting holes?

Yes, the housing measures 90 mm square and 25 mm thick, matching standard 9 cm fan cut-outs.

How do I connect the three wires so the inverter fan reports speed correctly?

Match the three pins to the header's ground, 24 V supply, and tachometer signal; reversing the signal wire is the common mistake that stops RPM reporting.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.