OEM Industries
OEM Industries MMF-09D24TS RM9 9CM 24V 0.19A 3 Pin Fan
A 9 cm dual-ball-bearing fan delivering 24 V airflow for YASKAWA and ABB inverter systems
- ColorBlack
- TypeFan only
- Fan Size9CM
- Bearing Type2 Ball
- Power Connector3 Pin
- LEDNo
- Reliable dual-ball bearing extends service life
- 90×25 mm frame fits standard 9 cm mounts
- 24 V 0.19 A draw suits inverter power supplies
- Three-pin connector provides tachometer feedback for monitoring
- Designed for Yaskawa PLC and ABB equipment
Industrial inverter cooling fan
The OEM Industries MMF-09D24TS RM9 is a 9 cm square frame fan built for 24 V DC industrial equipment. It targets engineers maintaining YASKAWA or ABB PLC inverter cabinets where a direct replacement is required.
Dual ball bearing and three wire lead
Black plastic housing measures 90 by 25 mm and uses a two ball bearing design for continuous duty cycles. A three pin connector supplies power and tachometer feedback to the inverter controller.
Verify voltage and mounting before ordering
Confirm the host unit runs on 24 V DC and draws no more than 0.19 A at the fan header. Check that the 90 mm screw pattern and three pin keying match the existing cutout and header orientation.
Kohokohdat
- Reliable dual-ball bearing extends service life
- 90×25 mm frame fits standard 9 cm mounts
- 24 V 0.19 A draw suits inverter power supplies
- Three-pin connector provides tachometer feedback for monitoring
- Designed for Yaskawa PLC and ABB equipment
Tekniset tiedot
| Model | MMF-09D24TS RM9 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 9CM |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| LED | No |
Kysymyksiä tästä tuotteesta
What voltage and current does the 3-pin connector on the MMF-09D24TS RM9 require?
The fan runs on 24 V and draws 0.19 A through its three-pin power connector.
Will the 90 mm by 25 mm frame fit my 9 cm mounting holes?
Yes, the housing measures 90 mm square and 25 mm thick, matching standard 9 cm fan cut-outs.
How do I connect the three wires so the inverter fan reports speed correctly?
Match the three pins to the header's ground, 24 V supply, and tachometer signal; reversing the signal wire is the common mistake that stops RPM reporting.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001052BTC
Varastossa