Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 9 cm square frame fan with three-wire connector

OEM Industries

OEM Industries MMF-09D24TS RM9 9CM 24V 0.19A 3 Pin Fan

SKU CH-QDE1-KNQAY

A 9 cm dual-ball-bearing fan delivering 24 V airflow for YASKAWA and ABB inverter systems

  • ColorBlack
  • TypeFan only
  • Fan Size9CM
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • LEDNo
  • Reliable dual-ball bearing extends service life
  • 90×25 mm frame fits standard 9 cm mounts
  • 24 V 0.19 A draw suits inverter power supplies
  • Three-pin connector provides tachometer feedback for monitoring
  • Designed for Yaskawa PLC and ABB equipment

Industrial inverter cooling fan

The OEM Industries MMF-09D24TS RM9 is a 9 cm square frame fan built for 24 V DC industrial equipment. It targets engineers maintaining YASKAWA or ABB PLC inverter cabinets where a direct replacement is required.

Dual ball bearing and three wire lead

Black plastic housing measures 90 by 25 mm and uses a two ball bearing design for continuous duty cycles. A three pin connector supplies power and tachometer feedback to the inverter controller.

Verify voltage and mounting before ordering

Confirm the host unit runs on 24 V DC and draws no more than 0.19 A at the fan header. Check that the 90 mm screw pattern and three pin keying match the existing cutout and header orientation.

Poudarki

  • Reliable dual-ball bearing extends service life
  • 90×25 mm frame fits standard 9 cm mounts
  • 24 V 0.19 A draw suits inverter power supplies
  • Three-pin connector provides tachometer feedback for monitoring
  • Designed for Yaskawa PLC and ABB equipment

Specifikacije

ModelMMF-09D24TS RM9
ColorBlack
TypeFan only
Fan Size9CM
Bearing Type2 Ball
Power Connector3 Pin
LEDNo

Vprašanja o tem izdelku

What voltage and current does the 3-pin connector on the MMF-09D24TS RM9 require?

The fan runs on 24 V and draws 0.19 A through its three-pin power connector.

Will the 90 mm by 25 mm frame fit my 9 cm mounting holes?

Yes, the housing measures 90 mm square and 25 mm thick, matching standard 9 cm fan cut-outs.

How do I connect the three wires so the inverter fan reports speed correctly?

Match the three pins to the header's ground, 24 V supply, and tachometer signal; reversing the signal wire is the common mistake that stops RPM reporting.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.