Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 9 cm square frame fan with three-wire connector

OEM Industries

OEM Industries MMF-09D24TS RM9 9CM 24V 0.19A 3 Pin Fan

SKU CH-QDE1-KNQAY

A 9 cm dual-ball-bearing fan delivering 24 V airflow for YASKAWA and ABB inverter systems

  • ColorBlack
  • TypeFan only
  • Fan Size9CM
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • LEDNo
  • Reliable dual-ball bearing extends service life
  • 90×25 mm frame fits standard 9 cm mounts
  • 24 V 0.19 A draw suits inverter power supplies
  • Three-pin connector provides tachometer feedback for monitoring
  • Designed for Yaskawa PLC and ABB equipment

Industrial inverter cooling fan

The OEM Industries MMF-09D24TS RM9 is a 9 cm square frame fan built for 24 V DC industrial equipment. It targets engineers maintaining YASKAWA or ABB PLC inverter cabinets where a direct replacement is required.

Dual ball bearing and three wire lead

Black plastic housing measures 90 by 25 mm and uses a two ball bearing design for continuous duty cycles. A three pin connector supplies power and tachometer feedback to the inverter controller.

Verify voltage and mounting before ordering

Confirm the host unit runs on 24 V DC and draws no more than 0.19 A at the fan header. Check that the 90 mm screw pattern and three pin keying match the existing cutout and header orientation.

Pluspunten

  • Reliable dual-ball bearing extends service life
  • 90×25 mm frame fits standard 9 cm mounts
  • 24 V 0.19 A draw suits inverter power supplies
  • Three-pin connector provides tachometer feedback for monitoring
  • Designed for Yaskawa PLC and ABB equipment

Specificaties

ModelMMF-09D24TS RM9
ColorBlack
TypeFan only
Fan Size9CM
Bearing Type2 Ball
Power Connector3 Pin
LEDNo

Vragen over dit artikel

What voltage and current does the 3-pin connector on the MMF-09D24TS RM9 require?

The fan runs on 24 V and draws 0.19 A through its three-pin power connector.

Will the 90 mm by 25 mm frame fit my 9 cm mounting holes?

Yes, the housing measures 90 mm square and 25 mm thick, matching standard 9 cm fan cut-outs.

How do I connect the three wires so the inverter fan reports speed correctly?

Match the three pins to the header's ground, 24 V supply, and tachometer signal; reversing the signal wire is the common mistake that stops RPM reporting.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.