NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
OWC
128GB DDR4 2933MHz ECC load-reduced DIMM for servers and workstations, 288-pin CL21 1.2V module compatible with Fujitsu part numbers
This module is a 128GB DDR4 2933 ECC load-reduced DIMM built for servers, workstations and NAS systems. It targets administrators who need high-capacity registered memory with error correction for 24/7 workloads. The 288-pin form factor fits DDR4 server platforms that accept LRDIMM modules. It is not compatible with standard desktop computers or with unbuffered or registered ECC memory types.
The single specification that decides fit is the 4Rx4 rank configuration combined with CL21 latency at DDR4 2933 (PC4-23400). The motherboard and memory controller must support load-reduced quad-rank modules at this speed and latency. Mixing with unbuffered or registered ECC DIMMs will prevent the system from posting. Backward compatibility with 2133, 2400 and 2666MHz buses is supported when the platform allows down-clocking.
Installation requires aligning the notch on the 288-pin edge connector with the slot key and pressing firmly until the retention clips engage. No heat spreader is present, so handle the PCB by its edges to avoid contaminating the gold contacts. The most common error is seating a module in a slot wired for registered or unbuffered memory, which causes a no-post condition. Verify the platform’s qualified vendor list for 4Rx4 LRDIMM support before purchase.
| Brand | OWC |
|---|---|
| Part Number | 2L9D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
It adds 128GB of error-correcting capacity that runs at 2933MHz with CL21 timing, letting the system handle larger workloads and more virtual machines without paging to disk.
PC4-23400 is the JEDEC standard name for DDR4-2933; the module delivers that data rate on any platform that supports the speed, and will also run at 2133, 2400 or 2666MHz if the system requires a lower frequency.
It fits a standard 288-pin DDR4 DIMM socket; the module has no heat spreader, so it occupies only the nominal board height and works in servers, workstations or NAS systems that accept load-reduced ECC memory.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?