NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
OWC
128GB DDR4 2933MHz ECC load-reduced DIMM for servers and workstations, 288-pin CL21 1.2V module compatible with Fujitsu part numbers
This module is a 128GB DDR4 2933 ECC load-reduced DIMM built for servers, workstations and NAS systems. It targets administrators who need high-capacity registered memory with error correction for 24/7 workloads. The 288-pin form factor fits DDR4 server platforms that accept LRDIMM modules. It is not compatible with standard desktop computers or with unbuffered or registered ECC memory types.
The single specification that decides fit is the 4Rx4 rank configuration combined with CL21 latency at DDR4 2933 (PC4-23400). The motherboard and memory controller must support load-reduced quad-rank modules at this speed and latency. Mixing with unbuffered or registered ECC DIMMs will prevent the system from posting. Backward compatibility with 2133, 2400 and 2666MHz buses is supported when the platform allows down-clocking.
Installation requires aligning the notch on the 288-pin edge connector with the slot key and pressing firmly until the retention clips engage. No heat spreader is present, so handle the PCB by its edges to avoid contaminating the gold contacts. The most common error is seating a module in a slot wired for registered or unbuffered memory, which causes a no-post condition. Verify the platform’s qualified vendor list for 4Rx4 LRDIMM support before purchase.
| Brand | OWC |
|---|---|
| Part Number | 2L9D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
It adds 128GB of error-correcting capacity that runs at 2933MHz with CL21 timing, letting the system handle larger workloads and more virtual machines without paging to disk.
PC4-23400 is the JEDEC standard name for DDR4-2933; the module delivers that data rate on any platform that supports the speed, and will also run at 2133, 2400 or 2666MHz if the system requires a lower frequency.
It fits a standard 288-pin DDR4 DIMM socket; the module has no heat spreader, so it occupies only the nominal board height and works in servers, workstations or NAS systems that accept load-reduced ECC memory.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?