NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
OWC
128GB DDR4 2933MHz ECC load-reduced DIMM for servers and workstations, 288-pin CL21 1.2V module compatible with Fujitsu part numbers
This module is a 128GB DDR4 2933 ECC load-reduced DIMM built for servers, workstations and NAS systems. It targets administrators who need high-capacity registered memory with error correction for 24/7 workloads. The 288-pin form factor fits DDR4 server platforms that accept LRDIMM modules. It is not compatible with standard desktop computers or with unbuffered or registered ECC memory types.
The single specification that decides fit is the 4Rx4 rank configuration combined with CL21 latency at DDR4 2933 (PC4-23400). The motherboard and memory controller must support load-reduced quad-rank modules at this speed and latency. Mixing with unbuffered or registered ECC DIMMs will prevent the system from posting. Backward compatibility with 2133, 2400 and 2666MHz buses is supported when the platform allows down-clocking.
Installation requires aligning the notch on the 288-pin edge connector with the slot key and pressing firmly until the retention clips engage. No heat spreader is present, so handle the PCB by its edges to avoid contaminating the gold contacts. The most common error is seating a module in a slot wired for registered or unbuffered memory, which causes a no-post condition. Verify the platform’s qualified vendor list for 4Rx4 LRDIMM support before purchase.
| Brand | OWC |
|---|---|
| Part Number | 2L9D44R4128G |
| Capacity | 128GB |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
It adds 128GB of error-correcting capacity that runs at 2933MHz with CL21 timing, letting the system handle larger workloads and more virtual machines without paging to disk.
PC4-23400 is the JEDEC standard name for DDR4-2933; the module delivers that data rate on any platform that supports the speed, and will also run at 2133, 2400 or 2666MHz if the system requires a lower frequency.
It fits a standard 288-pin DDR4 DIMM socket; the module has no heat spreader, so it occupies only the nominal board height and works in servers, workstations or NAS systems that accept load-reduced ECC memory.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?