BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
OWC
An 8 GB DDR5 4800 CL40 SODIMM running at 1.1 V for laptops, all-in-ones and NAS units
This 8 GB DDR5 module is built for laptops, all-in-one PCs and NAS units that accept 262-pin SO-DIMMs. It delivers a straightforward capacity increase for everyday multitasking and larger file handling. The stick is unbuffered, non-ECC and runs at the standard 1.1 V. Buyers who need more than 8 GB per slot should look elsewhere.
The module follows JEDEC DDR5 4800 specifications with CL40 latency and 1.1 V operation, so it draws only the power the platform allocates for a standard SO-DIMM. No heat spreader is fitted, relying on the system's own airflow for cooling. Acoustic impact is negligible because the component has no moving parts. Builders who require lower latency or higher voltage headroom will not find it here.
The single decisive figure is the 4800 MT/s (PC5-38400) CL40 rating, which must match the memory controller's supported speed grade. If the host platform only runs DDR5 at a lower data rate, the module will downclock automatically. Systems that demand a faster grade or a different CAS latency cannot use this module at its rated specification.
| Brand | OWC |
|---|---|
| Part Number | 4S8D51R608GB |
| Capacity | 8GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Power off the laptop, remove AC power and the battery if accessible, open the memory door, align the notch on the module with the slot key, press firmly until both side clips click, then re-fit the door and battery before turning on — the step most skip is confirming both clips have fully latched.
No routine maintenance is required; the module has no heat spreader and runs at 1.1V, so only replace it if a memory test reports errors or you need more than 8GB capacity.
The 8GB capacity is the first bottleneck — once the working set exceeds 8GB the system swaps to storage, which is far slower than the DDR5 4800 transfer rate.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?