BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
An 8 GB DDR5 4800 CL40 SODIMM running at 1.1 V for laptops, all-in-ones and NAS units
This 8 GB DDR5 module is built for laptops, all-in-one PCs and NAS units that accept 262-pin SO-DIMMs. It delivers a straightforward capacity increase for everyday multitasking and larger file handling. The stick is unbuffered, non-ECC and runs at the standard 1.1 V. Buyers who need more than 8 GB per slot should look elsewhere.
The module follows JEDEC DDR5 4800 specifications with CL40 latency and 1.1 V operation, so it draws only the power the platform allocates for a standard SO-DIMM. No heat spreader is fitted, relying on the system's own airflow for cooling. Acoustic impact is negligible because the component has no moving parts. Builders who require lower latency or higher voltage headroom will not find it here.
The single decisive figure is the 4800 MT/s (PC5-38400) CL40 rating, which must match the memory controller's supported speed grade. If the host platform only runs DDR5 at a lower data rate, the module will downclock automatically. Systems that demand a faster grade or a different CAS latency cannot use this module at its rated specification.
| Brand | OWC |
|---|---|
| Part Number | 4S8D51R608GB |
| Capacity | 8GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Power off the laptop, remove AC power and the battery if accessible, open the memory door, align the notch on the module with the slot key, press firmly until both side clips click, then re-fit the door and battery before turning on — the step most skip is confirming both clips have fully latched.
No routine maintenance is required; the module has no heat spreader and runs at 1.1V, so only replace it if a memory test reports errors or you need more than 8GB capacity.
The 8GB capacity is the first bottleneck — once the working set exceeds 8GB the system swaps to storage, which is far slower than the DDR5 4800 transfer rate.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?