BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
An 8 GB DDR5 4800 CL40 SODIMM running at 1.1 V for laptops, all-in-ones and NAS units
This 8 GB DDR5 module is built for laptops, all-in-one PCs and NAS units that accept 262-pin SO-DIMMs. It delivers a straightforward capacity increase for everyday multitasking and larger file handling. The stick is unbuffered, non-ECC and runs at the standard 1.1 V. Buyers who need more than 8 GB per slot should look elsewhere.
The module follows JEDEC DDR5 4800 specifications with CL40 latency and 1.1 V operation, so it draws only the power the platform allocates for a standard SO-DIMM. No heat spreader is fitted, relying on the system's own airflow for cooling. Acoustic impact is negligible because the component has no moving parts. Builders who require lower latency or higher voltage headroom will not find it here.
The single decisive figure is the 4800 MT/s (PC5-38400) CL40 rating, which must match the memory controller's supported speed grade. If the host platform only runs DDR5 at a lower data rate, the module will downclock automatically. Systems that demand a faster grade or a different CAS latency cannot use this module at its rated specification.
| Brand | OWC |
|---|---|
| Part Number | 4S8D51R608GB |
| Capacity | 8GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Power off the laptop, remove AC power and the battery if accessible, open the memory door, align the notch on the module with the slot key, press firmly until both side clips click, then re-fit the door and battery before turning on — the step most skip is confirming both clips have fully latched.
No routine maintenance is required; the module has no heat spreader and runs at 1.1V, so only replace it if a memory test reports errors or you need more than 8GB capacity.
The 8GB capacity is the first bottleneck — once the working set exceeds 8GB the system swaps to storage, which is far slower than the DDR5 4800 transfer rate.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟