BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00276732BTC
În stoc
OWC
OWC 8GB DDR5 4800 CL40 1Rx16 262-pin 1.1V SODIMM laptop RAM
An 8 GB DDR5 4800 CL40 SODIMM running at 1.1 V for laptops, all-in-ones and NAS units
- Capacity8GB
- Type262-Pin DDR5 SO-DIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.1V
- ECCNo
- 8GB DDR5 4800 MHz boosts multitasking speed
- CL40 latency and 1.1V voltage lower power draw
- 262-pin SODIMM fits laptops, AIOs and NAS
- JEDEC and RoHS compliant for warranty-safe upgrades
- Replaces Hynix HMCG66MEBSA092N and HMCG66MEBSA095N modules
8 GB DDR5 SODIMM for Laptops and NAS
This 8 GB DDR5 module is built for laptops, all-in-one PCs and NAS units that accept 262-pin SO-DIMMs. It delivers a straightforward capacity increase for everyday multitasking and larger file handling. The stick is unbuffered, non-ECC and runs at the standard 1.1 V. Buyers who need more than 8 GB per slot should look elsewhere.
JEDEC-standard thermals and power
The module follows JEDEC DDR5 4800 specifications with CL40 latency and 1.1 V operation, so it draws only the power the platform allocates for a standard SO-DIMM. No heat spreader is fitted, relying on the system's own airflow for cooling. Acoustic impact is negligible because the component has no moving parts. Builders who require lower latency or higher voltage headroom will not find it here.
4800 MT/s CL40 DDR5 speed rating
The single decisive figure is the 4800 MT/s (PC5-38400) CL40 rating, which must match the memory controller's supported speed grade. If the host platform only runs DDR5 at a lower data rate, the module will downclock automatically. Systems that demand a faster grade or a different CAS latency cannot use this module at its rated specification.
Puncte forte
- 8GB DDR5 4800 MHz boosts multitasking speed
- CL40 latency and 1.1V voltage lower power draw
- 262-pin SODIMM fits laptops, AIOs and NAS
- JEDEC and RoHS compliant for warranty-safe upgrades
- Replaces Hynix HMCG66MEBSA092N and HMCG66MEBSA095N modules
Specificații
| Brand | OWC |
|---|---|
| Part Number | 4S8D51R608GB |
| Capacity | 8GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Întrebări despre acest articol
How do I install the 262-pin SODIMM and what step do people often miss?
Power off the laptop, remove AC power and the battery if accessible, open the memory door, align the notch on the module with the slot key, press firmly until both side clips click, then re-fit the door and battery before turning on — the step most skip is confirming both clips have fully latched.
What maintenance or replacement will this 8GB DDR5 module need later?
No routine maintenance is required; the module has no heat spreader and runs at 1.1V, so only replace it if a memory test reports errors or you need more than 8GB capacity.
What limit appears first during sustained heavy workloads with this CL40 4800MHz memory?
The 8GB capacity is the first bottleneck — once the working set exceeds 8GB the system swaps to storage, which is far slower than the DDR5 4800 transfer rate.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
