PNY Technologies, Inc. CS1030 M280CS1030-500-RB 500GB internal SSD
- Internal Solid Stat…
- Consumer
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
PNY Technologies, Inc.
M.2 2280 drive with 1TB of 3D NAND storage and PCI-Express 3.0 x4 NVMe 1.3 interface for sequential reads up to 3500 MBps and writes up to 1800 MBps
Options 1TB CS2130
This PNY CS2130 is a 1TB internal SSD built for consumer PCs and laptops. It uses 3D NAND flash and an M.2 2280 form factor. The drive targets faster boot times and quicker application launches. Low power consumption keeps it cool and quiet during everyday workloads.
The drive connects through a PCI-Express 3.0 x4 link with NVMe 1.3 protocol. Sequential reads reach up to 3500 MBps and writes up to 1800 MBps on that interface. Bandwidth is capped by the Gen 3 x4 electrical ceiling. Sustained throughput will fall below peak once the controller exhausts its SLC cache.
One terabyte holds an operating system, common applications and a large media library with room to spare. The 2,000,000-hour MTBF rating reflects long-term reliability for typical consumer write volumes. Heavy, sustained write workloads will eventually hit the sequential write ceiling of 1800 MBps. Operating temperature range spans 0°C to 70°C.
| Brand | PNY |
|---|---|
| Series | CS2130 |
| Model | M280CS2130-1TB-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 1800 MBps |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Features | Sequential Read of up to 3,500 MB/s and Write of up to 1,800 MB/s Faster boot up and quicker application launch Better overall system performance Reliable storage Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| Siuntos svoris | 1.56 kg |
| Pakuotės dydis | 130 × 99 × 15 mm |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
This listing is the 1TB model; if you need more space you would have to select a different capacity from the same series.
It is the maximum sequential read speed the controller can deliver over a PCIe 3.0 x4 link; real-world speeds depend on workload, thermal conditions and the host controller.
It uses a PCI-Express 3.0 x4 connection with NVMe 1.3 protocol, which sets the upper limit for the 3500 MBps read and 1800 MBps write ratings.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?