PNY Technologies, Inc. CS1030 M280CS1030-500-RB 500GB internal SSD
- Internal Solid Stat…
- Consumer
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
PNY Technologies, Inc.
M.2 2280 drive with 1TB of 3D NAND storage and PCI-Express 3.0 x4 NVMe 1.3 interface for sequential reads up to 3500 MBps and writes up to 1800 MBps
Options 1TB CS2130
This PNY CS2130 is a 1TB internal SSD built for consumer PCs and laptops. It uses 3D NAND flash and an M.2 2280 form factor. The drive targets faster boot times and quicker application launches. Low power consumption keeps it cool and quiet during everyday workloads.
The drive connects through a PCI-Express 3.0 x4 link with NVMe 1.3 protocol. Sequential reads reach up to 3500 MBps and writes up to 1800 MBps on that interface. Bandwidth is capped by the Gen 3 x4 electrical ceiling. Sustained throughput will fall below peak once the controller exhausts its SLC cache.
One terabyte holds an operating system, common applications and a large media library with room to spare. The 2,000,000-hour MTBF rating reflects long-term reliability for typical consumer write volumes. Heavy, sustained write workloads will eventually hit the sequential write ceiling of 1800 MBps. Operating temperature range spans 0°C to 70°C.
| Brand | PNY |
|---|---|
| Series | CS2130 |
| Model | M280CS2130-1TB-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 1800 MBps |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Features | Sequential Read of up to 3,500 MB/s and Write of up to 1,800 MB/s Faster boot up and quicker application launch Better overall system performance Reliable storage Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| Sūtījuma svars | 1.56 kg |
| Sūtījuma izmēri | 130 × 99 × 15 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
This listing is the 1TB model; if you need more space you would have to select a different capacity from the same series.
It is the maximum sequential read speed the controller can deliver over a PCIe 3.0 x4 link; real-world speeds depend on workload, thermal conditions and the host controller.
It uses a PCI-Express 3.0 x4 connection with NVMe 1.3 protocol, which sets the upper limit for the 3500 MBps read and 1800 MBps write ratings.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?