PNY Technologies, Inc. CS1030 M280CS1030-500-RB 500GB internal SSD
- Internal Solid Stat…
- Consumer
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
PNY Technologies, Inc.
M.2 2280 drive with 1TB of 3D NAND storage and PCI-Express 3.0 x4 NVMe 1.3 interface for sequential reads up to 3500 MBps and writes up to 1800 MBps
Options 1TB CS2130
This PNY CS2130 is a 1TB internal SSD built for consumer PCs and laptops. It uses 3D NAND flash and an M.2 2280 form factor. The drive targets faster boot times and quicker application launches. Low power consumption keeps it cool and quiet during everyday workloads.
The drive connects through a PCI-Express 3.0 x4 link with NVMe 1.3 protocol. Sequential reads reach up to 3500 MBps and writes up to 1800 MBps on that interface. Bandwidth is capped by the Gen 3 x4 electrical ceiling. Sustained throughput will fall below peak once the controller exhausts its SLC cache.
One terabyte holds an operating system, common applications and a large media library with room to spare. The 2,000,000-hour MTBF rating reflects long-term reliability for typical consumer write volumes. Heavy, sustained write workloads will eventually hit the sequential write ceiling of 1800 MBps. Operating temperature range spans 0°C to 70°C.
| Brand | PNY |
|---|---|
| Series | CS2130 |
| Model | M280CS2130-1TB-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 1800 MBps |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Features | Sequential Read of up to 3,500 MB/s and Write of up to 1,800 MB/s Faster boot up and quicker application launch Better overall system performance Reliable storage Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| وزن الشحنة | 1.56 kg |
| أبعاد الطرد | 130 × 99 × 15 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
This listing is the 1TB model; if you need more space you would have to select a different capacity from the same series.
It is the maximum sequential read speed the controller can deliver over a PCIe 3.0 x4 link; real-world speeds depend on workload, thermal conditions and the host controller.
It uses a PCI-Express 3.0 x4 connection with NVMe 1.3 protocol, which sets the upper limit for the 3500 MBps read and 1800 MBps write ratings.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟