PNY Technologies, Inc. CS1030 M280CS1030-500-RB 500GB internal SSD
- Internal Solid Stat…
- Consumer
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
PNY Technologies, Inc.
M.2 2280 2TB NVMe drive with 3D NAND, PCIe 3.0 x4 interface and up to 3500 MB/s read and 3000 MB/s write speeds
Options 2TB CS2130
The PNY CS2130 is a 2TB internal SSD in M.2 2280 form factor that uses a PCI-Express 3.0 x4 interface with NVMe 1.3 protocol. It is built with 3D NAND and targets users upgrading from a SATA based solid state drive in an NVMe enabled PC or Mac computer. The drive delivers sequential read speeds up to 3500 MBps and write speeds up to 3000 MBps for faster boot up and quicker application launch.
Rated for an operating range of 0°C to +70°C, the drive maintains its low power consumption and quiet operation during extended workloads. The 3D NAND memory components provide enhanced reliability rated up to 30 times more robust than HDDs, while the MTBF of 2000000 hours supports consistent performance without a heatsink under typical consumer sustained write patterns.
This model replaces a SATA based solid state drive when the host system has an M.2 slot wired for PCI-Express 3.0 x4 NVMe operation. The jump is worth it when the platform can use the NVMe protocol to achieve up to 6 times the performance of SATA SSDs, delivering super-fast OS boot times and application loads for demanding applications and high-end games.
| Brand | PNY |
|---|---|
| Series | CS2130 |
| Model | M280CS2130-2TB-RB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3000 MBps |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Features | Sequential Read of up to 3,500 MB/s and Write of up to 3,000 MB/s Faster boot up and quicker application launch Better overall system performance Reliable storage Low power consumption, cool and quiet operation |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 6.60g |
| وزن الشحنة | 1.56 kg |
| أبعاد الطرد | 147 × 99 × 15 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The drive is designed for low power consumption with cool and quiet operation and an operating temperature range of 0°C to 70°C.
It requires an M.2 2280 slot wired for PCI-Express 3.0 x4 with NVMe 1.3 support.
No, the CS2130 uses the NVMe protocol over PCI-Express 3.0 x4 and is not compatible with SATA-only M.2 slots.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟