Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Brass G 1/4in male-female extension coupler, 30mm body, coated finish

PrimoChill

PrimoChill G 1/4in 30mm SX Extension Coupler diy cooling

SKU CH-8V8X-5TRJY

G 1/4in male-to-female extension coupler adds 30mm clearance for custom water-cooling loops, made from coated brass with an installed O-ring

  • TypeCPU Block

Option UV Green

Rodyti 9 daugiau konfigūracijų

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • Extends fittings by 30mm for component clearance
  • Male-to-female G 1/4in threads connect any standard fitting
  • Coated brass construction resists corrosion in liquid loops
  • Compact 35mm total height fits tight build spaces
  • Pre-installed O-ring on male side ensures leak-free seal

G 1/4in Extension Coupler

This PrimoChill G 1/4in 30mm SX Extension Coupler adds 30mm of clearance between two G 1/4in threaded components. It is a new DIY cooling part made from coated brass for custom water-cooling loops.

Builders needing extra thread reach

The male-to-female design suits loops where a standard fitting sits too deep or blocks adjacent hardware. It will not help installations that require a different thread standard or a shorter overall stack height.

30mm effective extension length

The coupler measures 30mm without threads and 35mm with threads engaged. This single dimension decides whether the part provides the spacing your specific block and radiator layout demands.

Privalumai

  • Extends fittings by 30mm for component clearance
  • Male-to-female G 1/4in threads connect any standard fitting
  • Coated brass construction resists corrosion in liquid loops
  • Compact 35mm total height fits tight build spaces
  • Pre-installed O-ring on male side ensures leak-free seal

Specifikacijos

TypeCPU Block

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the coated brass threads need re-taping or sealant replacement over time?

The coupler includes a pre-installed O-ring on the male G 1/4in. side that provides the primary seal, so additional thread tape or sealant is not required and no periodic re-taping is needed.

What clearance limit does the 30mm body impose in a tight loop?

The extender adds 30mm of length between fittings, or 35mm including the male thread, so the first limit you reach is the available straight-line space between the two components you are joining.

Does the coated brass retain more heat during continuous coolant flow?

The 30mm coated brass body has minimal thermal mass and simply conducts coolant at loop temperature; it does not generate heat and adds no measurable thermal load during all-day operation.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.