Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Brass G 1/4in male-female extension coupler, 30mm body, coated finish

PrimoChill

PrimoChill G 1/4in 30mm SX Extension Coupler diy cooling

SKU CH-8V8X-5TRJY

G 1/4in male-to-female extension coupler adds 30mm clearance for custom water-cooling loops, made from coated brass with an installed O-ring

  • TypeCPU Block

Option UV Green

Nog 9 configuraties tonen

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Extends fittings by 30mm for component clearance
  • Male-to-female G 1/4in threads connect any standard fitting
  • Coated brass construction resists corrosion in liquid loops
  • Compact 35mm total height fits tight build spaces
  • Pre-installed O-ring on male side ensures leak-free seal

G 1/4in Extension Coupler

This PrimoChill G 1/4in 30mm SX Extension Coupler adds 30mm of clearance between two G 1/4in threaded components. It is a new DIY cooling part made from coated brass for custom water-cooling loops.

Builders needing extra thread reach

The male-to-female design suits loops where a standard fitting sits too deep or blocks adjacent hardware. It will not help installations that require a different thread standard or a shorter overall stack height.

30mm effective extension length

The coupler measures 30mm without threads and 35mm with threads engaged. This single dimension decides whether the part provides the spacing your specific block and radiator layout demands.

Pluspunten

  • Extends fittings by 30mm for component clearance
  • Male-to-female G 1/4in threads connect any standard fitting
  • Coated brass construction resists corrosion in liquid loops
  • Compact 35mm total height fits tight build spaces
  • Pre-installed O-ring on male side ensures leak-free seal

Specificaties

TypeCPU Block

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the coated brass threads need re-taping or sealant replacement over time?

The coupler includes a pre-installed O-ring on the male G 1/4in. side that provides the primary seal, so additional thread tape or sealant is not required and no periodic re-taping is needed.

What clearance limit does the 30mm body impose in a tight loop?

The extender adds 30mm of length between fittings, or 35mm including the male thread, so the first limit you reach is the available straight-line space between the two components you are joining.

Does the coated brass retain more heat during continuous coolant flow?

The 30mm coated brass body has minimal thermal mass and simply conducts coolant at loop temperature; it does not generate heat and adds no measurable thermal load during all-day operation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.