Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Square brass adapter block with four threaded ports in a cross layout, knurled finish on each face

PrimoChill

PrimoChill G 1/4in 4-Way Quad SX Adapter Block diy cooling

SKU CH-TY7D-DAYB4

A G 1/4in four-way adapter block that splits or combines a water-cooling loop at 90 degrees and provides an inline fill or drain point

  • TypeCPU Block

Option UV Green

Nog 9 configuraties tonen

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Split or combine loop at 90° with four G 1/4in ports
  • Create inline fill or drain point using quad adapter block
  • Compact 23.9mm cube fits tight custom-loop layouts
  • Coated brass construction resists corrosion in liquid-cooling systems
  • Trusted US brand with 20-year water-cooling heritage

Loop Splitter and Fill Port

The PrimoChill G 1/4in 4-Way Quad SX Adapter Block splits or combines a custom water-cooling loop at a 90 degree angle. It also creates an inline fill or drain access point for maintenance. The G 1/4in female threads accept standard fittings used by PC builders and modders. Four ports give flexibility for complex routing.

Thread Standard and Clearance

The G 1/4in thread is the de facto standard for desktop liquid cooling, so compatibility with common fittings is broad. Each port adds a connection point that must be sealed, so leak testing every joint is essential. The 23.9mm cube footprint fits tight spaces but leaves little room for large wrenches. Overtightening can damage the coated brass finish.

Four-Port Capacity Limits

Four ports handle a CPU block, GPU block, radiator and reservoir in a single junction. Adding more components requires another adapter or a distribution plate. The 90 degree layout restricts straight-through flow paths, so plan tube bends accordingly. Coated brass resists corrosion but candy SX finishes vary in tone between knurled and smooth surfaces.

Pluspunten

  • Split or combine loop at 90° with four G 1/4in ports
  • Create inline fill or drain point using quad adapter block
  • Compact 23.9mm cube fits tight custom-loop layouts
  • Coated brass construction resists corrosion in liquid-cooling systems
  • Trusted US brand with 20-year water-cooling heritage

Specificaties

TypeCPU Block

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Should I choose the 4-way quad SX adapter or a simpler fitting for my loop?

Choose the 4-way quad SX adapter when you need to split or combine flow at a 90 degree angle or create an inline fill and drain point; a simpler fitting is sufficient for straight connections.

What does the 90 degree split mean once the block is installed in my loop?

The 90 degree split lets coolant turn a corner while dividing into three paths, so you can route tubing around tight spaces and feed multiple components from one junction.

Will the G 1/4in female thread limit flow or pressure in a high-performance loop?

The G 1/4in female thread is the standard water-cooling interface and does not cap flow or pressure in any practical loop; the 23.9mm cube body adds negligible restriction.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.