Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Sky-blue brass G1/4 straight coupler, 20 mm tall with threads, 10 mm without

PrimoChill

PrimoChill Dual Male G1/4 Straight Coupler SX Sky Blue diy cooling

SKU CH-WFP1-P14BT

Connects two female G1/4 fittings with a 20 mm brass coupler in a sky-blue finish

  • TypeFittings

Option Sky Blue

Nog 9 configuraties tonen

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Connects two female G1/4 ports with a male-to-male thread
  • Brass construction resists corrosion in liquid-cooling loops
  • Sky-blue SX finish adds a coordinated colour accent
  • Low 20 mm installed height fits tight tubing runs
  • Threaded section measures 10 mm for precise spacing

G1/4 Brass Extension Coupler

The PrimoChill Dual Male G1/4 Straight Coupler connects two female G1/4 threaded fittings in a custom liquid-cooling loop. Its solid brass body provides durable, corrosion-resistant sealing for DIY builders. The SX Sky Blue finish adds a consistent colour accent across the system.

Builders joining female ports

This coupler suits anyone needing to bridge two female G1/4 components such as radiators, blocks or reservoirs. It does not serve builds that require angled routing, rotary adjustment or a reduction to a smaller thread size.

Compact 10 mm body with 20 mm overall length

The short profile fits tight spaces between components while maintaining full thread engagement. Headroom is limited to straight inline connections; offsets or multi-port distribution need different fittings.

Pluspunten

  • Connects two female G1/4 ports with a male-to-male thread
  • Brass construction resists corrosion in liquid-cooling loops
  • Sky-blue SX finish adds a coordinated colour accent
  • Low 20 mm installed height fits tight tubing runs
  • Threaded section measures 10 mm for precise spacing

Specificaties

TypeFittings

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What thread size must my existing fittings have to connect with this G1/4 coupler?

Your fittings need G1/4 threads; the coupler has dual male G1/4 threads so it joins two female G1/4 ports directly.

Will the 20 mm overall height clear the space between my current water-block and reservoir?

The coupler measures 20 mm with threads and 10 mm without, so measure the gap between components to confirm clearance.

How can I verify the seal is leak-free after installing the brass coupler?

Pressurise the loop slowly and watch each G1/4 joint for drips; a dry brass coupler with no moisture at the threads confirms a good seal.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.