BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
RIITOP
Adds two M.2 NVMe slots and a PCIe x16 (x8 signal) slot via a PCIe 4.0 x16 connection, requiring motherboard bifurcation support
This RIITOP adapter adds two M.2 NVMe slots and an additional PCIe x16 slot running at x8 signal through a single PCIe 4.0 x16 connection. It targets builders who want to install multiple NVMe drives while retaining an expansion slot for another card. The board requires a motherboard that supports PCIe bifurcation set to x8x4x4 in the BIOS. Without that setting the M.2 slots will not be recognised.
Both M.2 slots are placed on opposite sides of the PCB, keeping the card short enough for tight chassis. Each slot has its own LED indicator so you can see drive activity at a glance. The extra PCIe x16 connector accepts any standard add-in card at x8 electrical speed. Supported drive lengths are 2230, 2242, 2260, 2280 and 22110. SATA-based M.2 drives are not compatible.
If your platform already offers x8x4x4 bifurcation — typical on X299 or X399 systems — this card upgrades from a basic one-drive riser to dual NVMe plus a spare x8 slot. The jump is worth it only when the CPU and chipset provide enough lanes for all three endpoints. Buyers whose motherboards lack bifurcation or only support x4x4x4x4 will not see the M.2 drives appear.
| Type | NVME to PCIe 4.0 |
|---|
Yes, the board must support PCIe x16 bifurcation set to x8x4x4 in BIOS; without it only the extra PCIe x16 slot works and the NVMe drives are not recognised.
The slots accept M-key NVMe SSDs in 2230, 2242, 2260, 2280 and 22110 sizes; SATA-based B+M key drives are not supported.
Insert the card into a PCIe 4.0 or 3.0 x16 slot, mount the NVMe drives on both sides of the PCB, then enable x8x4x4 bifurcation in the motherboard BIOS — skipping the BIOS setting is the common mistake.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?