BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
RIITOP
Adds two M.2 NVMe slots and a PCIe x16 (x8 signal) slot via a PCIe 4.0 x16 connection, requiring motherboard bifurcation support
This RIITOP adapter adds two M.2 NVMe slots and an additional PCIe x16 slot running at x8 signal through a single PCIe 4.0 x16 connection. It targets builders who want to install multiple NVMe drives while retaining an expansion slot for another card. The board requires a motherboard that supports PCIe bifurcation set to x8x4x4 in the BIOS. Without that setting the M.2 slots will not be recognised.
Both M.2 slots are placed on opposite sides of the PCB, keeping the card short enough for tight chassis. Each slot has its own LED indicator so you can see drive activity at a glance. The extra PCIe x16 connector accepts any standard add-in card at x8 electrical speed. Supported drive lengths are 2230, 2242, 2260, 2280 and 22110. SATA-based M.2 drives are not compatible.
If your platform already offers x8x4x4 bifurcation — typical on X299 or X399 systems — this card upgrades from a basic one-drive riser to dual NVMe plus a spare x8 slot. The jump is worth it only when the CPU and chipset provide enough lanes for all three endpoints. Buyers whose motherboards lack bifurcation or only support x4x4x4x4 will not see the M.2 drives appear.
| Type | NVME to PCIe 4.0 |
|---|
Yes, the board must support PCIe x16 bifurcation set to x8x4x4 in BIOS; without it only the extra PCIe x16 slot works and the NVMe drives are not recognised.
The slots accept M-key NVMe SSDs in 2230, 2242, 2260, 2280 and 22110 sizes; SATA-based B+M key drives are not supported.
Insert the card into a PCIe 4.0 or 3.0 x16 slot, mount the NVMe drives on both sides of the PCB, then enable x8x4x4 bifurcation in the motherboard BIOS — skipping the BIOS setting is the common mistake.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?