Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver 3.5 inch enterprise hard drive with SAS connector and green circuit board visible

Seagate

Seagate ST10000NM0096 10 TB 7200 RPM SAS 12.0 Gb/s 256 MB internal hard drive

SKU CH-R8JB-MWK5M

Enterprise-grade 10 TB SAS drive spinning at 7200 RPM with a 256 MB cache and a 254 MB/s sustained transfer rate

  • 10 TB capacity stores massive datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 12.0 Gb/s interface delivers 254 MB/s sustained throughput
  • 5 million hour MTBF supports continuous enterprise workloads
  • 5 W idle power reduces rack energy consumption

10 TB enterprise SAS drive

The Seagate ST10000NM0096 is a 10 TB internal hard drive built for enterprise workloads. It spins at 7200 RPM and connects through a SAS 12.0 Gb/s interface with a 256 MB cache. The 3.5 inch form factor fits standard enterprise drive bays.

Suited for high-capacity arrays

This drive suits administrators building high-capacity storage arrays or nearline archives that demand sustained throughput. Buyers who need a single drive for a desktop without a SAS controller should look elsewhere, as the interface requires compatible host hardware.

SAS 12.0 Gb/s interface decides fit

The SAS 12.0 Gb/s interface is the specification that determines compatibility. A system must provide a SAS backplane or controller with matching signalling, plus +12 V and +5 V power rails. Without that connection the drive cannot operate.

Privalumai

  • 10 TB capacity stores massive datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 12.0 Gb/s interface delivers 254 MB/s sustained throughput
  • 5 million hour MTBF supports continuous enterprise workloads
  • 5 W idle power reduces rack energy consumption

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

What does the 254 MB/s sustained transfer rate mean once the drive is installed in a server?

It is the maximum sequential throughput the drive can deliver to the SAS controller under typical workloads, so large-file copies or backup streams will top out near that figure.

What does the SAS 12.0 Gb/s interface cap in practice?

The 12.0 Gb/s link sets the bus ceiling, but the drive's own media limit of 254 MB/s sustained is reached well before the interface saturates.

What physical space and mounting does this 3.5-inch drive require?

It fits a standard 3.5-inch by 1.0-inch bay measuring 101.85 mm wide, 147.00 mm deep and 26.11 mm high, and weighs 650.0 g.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.