Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 3.5 inch enterprise hard drive with SAS connector and green circuit board visible

Seagate

Seagate ST10000NM0096 10 TB 7200 RPM SAS 12.0 Gb/s 256 MB internal hard drive

SKU CH-R8JB-MWK5M

Enterprise-grade 10 TB SAS drive spinning at 7200 RPM with a 256 MB cache and a 254 MB/s sustained transfer rate

  • 10 TB capacity stores massive datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 12.0 Gb/s interface delivers 254 MB/s sustained throughput
  • 5 million hour MTBF supports continuous enterprise workloads
  • 5 W idle power reduces rack energy consumption

10 TB enterprise SAS drive

The Seagate ST10000NM0096 is a 10 TB internal hard drive built for enterprise workloads. It spins at 7200 RPM and connects through a SAS 12.0 Gb/s interface with a 256 MB cache. The 3.5 inch form factor fits standard enterprise drive bays.

Suited for high-capacity arrays

This drive suits administrators building high-capacity storage arrays or nearline archives that demand sustained throughput. Buyers who need a single drive for a desktop without a SAS controller should look elsewhere, as the interface requires compatible host hardware.

SAS 12.0 Gb/s interface decides fit

The SAS 12.0 Gb/s interface is the specification that determines compatibility. A system must provide a SAS backplane or controller with matching signalling, plus +12 V and +5 V power rails. Without that connection the drive cannot operate.

Pluspunten

  • 10 TB capacity stores massive datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 12.0 Gb/s interface delivers 254 MB/s sustained throughput
  • 5 million hour MTBF supports continuous enterprise workloads
  • 5 W idle power reduces rack energy consumption

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

What does the 254 MB/s sustained transfer rate mean once the drive is installed in a server?

It is the maximum sequential throughput the drive can deliver to the SAS controller under typical workloads, so large-file copies or backup streams will top out near that figure.

What does the SAS 12.0 Gb/s interface cap in practice?

The 12.0 Gb/s link sets the bus ceiling, but the drive's own media limit of 254 MB/s sustained is reached well before the interface saturates.

What physical space and mounting does this 3.5-inch drive require?

It fits a standard 3.5-inch by 1.0-inch bay measuring 101.85 mm wide, 147.00 mm deep and 26.11 mm high, and weighs 650.0 g.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.