Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver 3.5 inch enterprise hard drive with SAS connector and green circuit board visible

Seagate

Seagate ST10000NM0096 10 TB 7200 RPM SAS 12.0 Gb/s 256 MB internal hard drive

SKU CH-R8JB-MWK5M

Enterprise-grade 10 TB SAS drive spinning at 7200 RPM with a 256 MB cache and a 254 MB/s sustained transfer rate

  • 10 TB capacity stores massive datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 12.0 Gb/s interface delivers 254 MB/s sustained throughput
  • 5 million hour MTBF supports continuous enterprise workloads
  • 5 W idle power reduces rack energy consumption

10 TB enterprise SAS drive

The Seagate ST10000NM0096 is a 10 TB internal hard drive built for enterprise workloads. It spins at 7200 RPM and connects through a SAS 12.0 Gb/s interface with a 256 MB cache. The 3.5 inch form factor fits standard enterprise drive bays.

Suited for high-capacity arrays

This drive suits administrators building high-capacity storage arrays or nearline archives that demand sustained throughput. Buyers who need a single drive for a desktop without a SAS controller should look elsewhere, as the interface requires compatible host hardware.

SAS 12.0 Gb/s interface decides fit

The SAS 12.0 Gb/s interface is the specification that determines compatibility. A system must provide a SAS backplane or controller with matching signalling, plus +12 V and +5 V power rails. Without that connection the drive cannot operate.

Poudarki

  • 10 TB capacity stores massive datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 12.0 Gb/s interface delivers 254 MB/s sustained throughput
  • 5 million hour MTBF supports continuous enterprise workloads
  • 5 W idle power reduces rack energy consumption

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What does the 254 MB/s sustained transfer rate mean once the drive is installed in a server?

It is the maximum sequential throughput the drive can deliver to the SAS controller under typical workloads, so large-file copies or backup streams will top out near that figure.

What does the SAS 12.0 Gb/s interface cap in practice?

The 12.0 Gb/s link sets the bus ceiling, but the drive's own media limit of 254 MB/s sustained is reached well before the interface saturates.

What physical space and mounting does this 3.5-inch drive require?

It fits a standard 3.5-inch by 1.0-inch bay measuring 101.85 mm wide, 147.00 mm deep and 26.11 mm high, and weighs 650.0 g.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.