Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 3.5 inch enterprise hard drive with SAS connector and green circuit board visible

Seagate

Seagate ST10000NM0096 10 TB 7200 RPM SAS 12.0 Gb/s 256 MB internal hard drive

SKU CH-R8JB-MWK5M

Enterprise-grade 10 TB SAS drive spinning at 7200 RPM with a 256 MB cache and a 254 MB/s sustained transfer rate

  • 10 TB capacity stores massive datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 12.0 Gb/s interface delivers 254 MB/s sustained throughput
  • 5 million hour MTBF supports continuous enterprise workloads
  • 5 W idle power reduces rack energy consumption

10 TB enterprise SAS drive

The Seagate ST10000NM0096 is a 10 TB internal hard drive built for enterprise workloads. It spins at 7200 RPM and connects through a SAS 12.0 Gb/s interface with a 256 MB cache. The 3.5 inch form factor fits standard enterprise drive bays.

Suited for high-capacity arrays

This drive suits administrators building high-capacity storage arrays or nearline archives that demand sustained throughput. Buyers who need a single drive for a desktop without a SAS controller should look elsewhere, as the interface requires compatible host hardware.

SAS 12.0 Gb/s interface decides fit

The SAS 12.0 Gb/s interface is the specification that determines compatibility. A system must provide a SAS backplane or controller with matching signalling, plus +12 V and +5 V power rails. Without that connection the drive cannot operate.

Priekšrocības

  • 10 TB capacity stores massive datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SAS 12.0 Gb/s interface delivers 254 MB/s sustained throughput
  • 5 million hour MTBF supports continuous enterprise workloads
  • 5 W idle power reduces rack energy consumption

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What does the 254 MB/s sustained transfer rate mean once the drive is installed in a server?

It is the maximum sequential throughput the drive can deliver to the SAS controller under typical workloads, so large-file copies or backup streams will top out near that figure.

What does the SAS 12.0 Gb/s interface cap in practice?

The 12.0 Gb/s link sets the bus ceiling, but the drive's own media limit of 254 MB/s sustained is reached well before the interface saturates.

What physical space and mounting does this 3.5-inch drive require?

It fits a standard 3.5-inch by 1.0-inch bay measuring 101.85 mm wide, 147.00 mm deep and 26.11 mm high, and weighs 650.0 g.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.