NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Silverstone
Fanless 120 W DC-DC kit with 12 V adapter, 24-pin, 8-pin EPS, three SATA and one peripheral connector
The Silverstone AD120-DC delivers 120 W through a fanless DC-DC board paired with a 12 V 10 A AC-DC adapter. It targets builders of compact systems such as the Milo 10 chassis who need silent operation and a minimal footprint. The black-wire loom includes a 24-pin ATX connector, an 8-pin EPS connector, three SATA connectors and one 4-pin peripheral connector.
This kit replaces bulkier flex-ATX or low-profile internal supplies where space and noise are primary constraints. The jump is worthwhile when the total system draw stays within the 120 W limit and the chassis can accommodate the external adapter brick. Builds requiring higher wattage or additional PCIe power connectors cannot use this solution.
The DC-DC board accepts a single 12 V input rated at 10 A, capping combined output at 120 W across all rails. Cable lengths are fixed at 200 mm for the 24-pin and peripheral leads, 250 mm for the EPS lead, and 300 mm plus two 100 mm branches for the three SATA connectors. The board measures 160 mm by 45 mm by 25 mm, while the adapter measures 168 mm by 71 mm by 37.5 mm.
| Brand | SilverStone |
|---|---|
| Model | AD120-DC |
| Color | Black |
| Maximum Power | 120 W |
| Fans | Fanless |
| Output | 10A |
| Connectors | 1 x 24 pin ATX / 1 x 4 pin Peripheral / 1 x 8 pin (4+4) EPS (CPU) / 3 x SATA |
| Cable Spec | 1 x 24-Pin motherboard connector (200mm) 1 x 8 / 4-Pin EPS / ATX 12V connector (250mm) 3 x SATA connector (300mm /100mm / 100mm) 1 x 4-Pin Peripheral connector (200mm) |
| Dimensions | DC board dimension: 160mm (W) x 25mm (H) x 45mm (D) Dimension: 168mm (W) x 71mm (H) x 37.5mm (D) |
| Siuntos svoris | 1.36 kg |
| Pakuotės dydis | 178 × 76 × 51 mm |
The DC board measures 160 mm wide by 45 mm deep by 25 mm high, so allow at least that footprint plus cable bend radius behind the motherboard tray.
Route the 200 mm 24-pin ATX cable to the motherboard before plugging the 250 mm 4+4-pin EPS and 300 mm SATA leads, otherwise the stiff 24-pin harness can kink.
Replace the adapter if output voltage drifts below 12 V under load or if the unit becomes audibly noisy, as the fanless DC board relies entirely on clean adapter power.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?