Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

Silverstone

Silverstone AD120-DC 120W Fanless Power Supply

SKU CH-EK20-RH89N MPN AD120-DC

Fanless 120 W DC-DC kit with 12 V adapter, 24-pin, 8-pin EPS, three SATA and one peripheral connector

  • ColorBlack
  • Maximum Power120 W
  • FansFanless
  • Output10A
  • Connectors1 x 24 pin ATX / 1 x 4 pin Peripheral / 1 x 8 pin (4+4) EPS
  • Cable Spec1 x 24-Pin motherboard connector (200mm) 1 x 8 / 4-Pin EPS /
  • Silent operation with fanless 120 W design
  • Compact DC board fits 160 mm wide spaces
  • External 12 V 10 A adapter keeps heat outside case
  • Full ATX connector set includes EPS and three SATA
  • Black sleeved cables simplify clean cable routing

Compact Fanless Power Kit

The Silverstone AD120-DC delivers 120 W through a fanless DC-DC board paired with a 12 V 10 A AC-DC adapter. It targets builders of compact systems such as the Milo 10 chassis who need silent operation and a minimal footprint. The black-wire loom includes a 24-pin ATX connector, an 8-pin EPS connector, three SATA connectors and one 4-pin peripheral connector.

Upgrade From Flex ATX Units

This kit replaces bulkier flex-ATX or low-profile internal supplies where space and noise are primary constraints. The jump is worthwhile when the total system draw stays within the 120 W limit and the chassis can accommodate the external adapter brick. Builds requiring higher wattage or additional PCIe power connectors cannot use this solution.

Limits of 12 V DC Input

The DC-DC board accepts a single 12 V input rated at 10 A, capping combined output at 120 W across all rails. Cable lengths are fixed at 200 mm for the 24-pin and peripheral leads, 250 mm for the EPS lead, and 300 mm plus two 100 mm branches for the three SATA connectors. The board measures 160 mm by 45 mm by 25 mm, while the adapter measures 168 mm by 71 mm by 37.5 mm.

Punti di forza

  • Silent operation with fanless 120 W design
  • Compact DC board fits 160 mm wide spaces
  • External 12 V 10 A adapter keeps heat outside case
  • Full ATX connector set includes EPS and three SATA
  • Black sleeved cables simplify clean cable routing

Caratteristiche tecniche

BrandSilverStone
ModelAD120-DC
ColorBlack
Maximum Power120 W
FansFanless
Output10A
Connectors1 x 24 pin ATX / 1 x 4 pin Peripheral / 1 x 8 pin (4+4) EPS (CPU) / 3 x SATA
Cable Spec1 x 24-Pin motherboard connector (200mm)
1 x 8 / 4-Pin EPS / ATX 12V connector (250mm)
3 x SATA connector (300mm /100mm / 100mm)
1 x 4-Pin Peripheral connector (200mm)
DimensionsDC board dimension: 160mm (W) x 25mm (H) x 45mm (D)
Dimension: 168mm (W) x 71mm (H) x 37.5mm (D)
Peso di spedizione1.36 kg
Dimensioni del pacco178 × 76 × 51 mm

Domande su questo articolo

What clearance does the 160 mm wide DC board need inside the case?

The DC board measures 160 mm wide by 45 mm deep by 25 mm high, so allow at least that footprint plus cable bend radius behind the motherboard tray.

Which connector must be seated first to avoid bending the 24-pin cable?

Route the 200 mm 24-pin ATX cable to the motherboard before plugging the 250 mm 4+4-pin EPS and 300 mm SATA leads, otherwise the stiff 24-pin harness can kink.

When should the external 120 W 12 V/10 A AC-DC adapter be replaced?

Replace the adapter if output voltage drifts below 12 V under load or if the unit becomes audibly noisy, as the fanless DC board relies entirely on clean adapter power.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.