Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small green circuit board with 16-pin Micro SATA and mSATA connectors

SMUGDESK

SMUGDESK 1.8 Inch 16Pin Micro SATA to mSATA Adapter Card

SKU CH-1G2V-JVGPM

Converts 1.8 inch 16Pin Micro SATA to mSATA for SSD use in compact systems

  • Bidirectional 1.8" Micro SATA to mSATA conversion
  • 16Pin Micro SATA connector ensures stable signal transmission
  • Compact circuit board saves space in embedded devices
  • Works with 1.8" Micro SATA SSD and standard mSATA drives
  • Plug and play installation requires no drivers

Micro SATA to mSATA converter

This adapter card provides bidirectional conversion between 1.8 inch 16Pin Micro SATA and mSATA interfaces. It lets you connect a Micro SATA SSD to an mSATA slot or an mSATA drive to a Micro SATA port. The compact board fits embedded devices and mini PCs. No drivers are required for operation.

Builders with mixed SATA form factors

Suits technicians who must link 1.8 inch Micro SATA storage to mSATA sockets in industrial equipment or compact computers. Buyers who need a SATA-to-PCIe bridge or a converter for a different interface cannot use this product. It addresses only the two listed SATA variants.

16Pin Micro SATA connector

The card uses a standard 16Pin Micro SATA connector for stable signal transmission. This pin count matches the 1.8 inch Micro SATA specification and determines whether your drive will seat correctly. Verify that your SSD presents the same 16Pin layout before purchasing.

Privalumai

  • Bidirectional 1.8" Micro SATA to mSATA conversion
  • 16Pin Micro SATA connector ensures stable signal transmission
  • Compact circuit board saves space in embedded devices
  • Works with 1.8" Micro SATA SSD and standard mSATA drives
  • Plug and play installation requires no drivers

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

Does the 16-pin Micro SATA connector keep full SATA speed when the adapter is installed in a mini PC?

Yes, the 16-pin Micro SATA connector passes the native SATA signal through the board, so the drive runs at its normal SATA rate once seated in the mini PC.

Is the mSATA side limited to SATA I or does it support SATA III?

The mSATA interface on this card carries the same SATA signalling, so the link operates at whatever SATA revision the host and drive negotiate.

Will the board fit inside a 1.8-inch drive bay without blocking adjacent components?

The compact circuit board matches the 1.8-inch form factor, leaving enough clearance for tight drive bays and neighbouring parts.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.