نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small green circuit board with 16-pin Micro SATA and mSATA connectors

SMUGDESK

SMUGDESK 1.8 Inch 16Pin Micro SATA to mSATA Adapter Card

SKU CH-1G2V-JVGPM

Converts 1.8 inch 16Pin Micro SATA to mSATA for SSD use in compact systems

  • Bidirectional 1.8" Micro SATA to mSATA conversion
  • 16Pin Micro SATA connector ensures stable signal transmission
  • Compact circuit board saves space in embedded devices
  • Works with 1.8" Micro SATA SSD and standard mSATA drives
  • Plug and play installation requires no drivers

Micro SATA to mSATA converter

This adapter card provides bidirectional conversion between 1.8 inch 16Pin Micro SATA and mSATA interfaces. It lets you connect a Micro SATA SSD to an mSATA slot or an mSATA drive to a Micro SATA port. The compact board fits embedded devices and mini PCs. No drivers are required for operation.

Builders with mixed SATA form factors

Suits technicians who must link 1.8 inch Micro SATA storage to mSATA sockets in industrial equipment or compact computers. Buyers who need a SATA-to-PCIe bridge or a converter for a different interface cannot use this product. It addresses only the two listed SATA variants.

16Pin Micro SATA connector

The card uses a standard 16Pin Micro SATA connector for stable signal transmission. This pin count matches the 1.8 inch Micro SATA specification and determines whether your drive will seat correctly. Verify that your SSD presents the same 16Pin layout before purchasing.

أبرز المميزات

  • Bidirectional 1.8" Micro SATA to mSATA conversion
  • 16Pin Micro SATA connector ensures stable signal transmission
  • Compact circuit board saves space in embedded devices
  • Works with 1.8" Micro SATA SSD and standard mSATA drives
  • Plug and play installation requires no drivers

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Does the 16-pin Micro SATA connector keep full SATA speed when the adapter is installed in a mini PC?

Yes, the 16-pin Micro SATA connector passes the native SATA signal through the board, so the drive runs at its normal SATA rate once seated in the mini PC.

Is the mSATA side limited to SATA I or does it support SATA III?

The mSATA interface on this card carries the same SATA signalling, so the link operates at whatever SATA revision the host and drive negotiate.

Will the board fit inside a 1.8-inch drive bay without blocking adjacent components?

The compact circuit board matches the 1.8-inch form factor, leaving enough clearance for tight drive bays and neighbouring parts.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.