Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small green circuit board with 16-pin Micro SATA and mSATA connectors

SMUGDESK

SMUGDESK 1.8 Inch 16Pin Micro SATA to mSATA Adapter Card

SKU CH-1G2V-JVGPM

Converts 1.8 inch 16Pin Micro SATA to mSATA for SSD use in compact systems

  • Bidirectional 1.8" Micro SATA to mSATA conversion
  • 16Pin Micro SATA connector ensures stable signal transmission
  • Compact circuit board saves space in embedded devices
  • Works with 1.8" Micro SATA SSD and standard mSATA drives
  • Plug and play installation requires no drivers

Micro SATA to mSATA converter

This adapter card provides bidirectional conversion between 1.8 inch 16Pin Micro SATA and mSATA interfaces. It lets you connect a Micro SATA SSD to an mSATA slot or an mSATA drive to a Micro SATA port. The compact board fits embedded devices and mini PCs. No drivers are required for operation.

Builders with mixed SATA form factors

Suits technicians who must link 1.8 inch Micro SATA storage to mSATA sockets in industrial equipment or compact computers. Buyers who need a SATA-to-PCIe bridge or a converter for a different interface cannot use this product. It addresses only the two listed SATA variants.

16Pin Micro SATA connector

The card uses a standard 16Pin Micro SATA connector for stable signal transmission. This pin count matches the 1.8 inch Micro SATA specification and determines whether your drive will seat correctly. Verify that your SSD presents the same 16Pin layout before purchasing.

Points forts

  • Bidirectional 1.8" Micro SATA to mSATA conversion
  • 16Pin Micro SATA connector ensures stable signal transmission
  • Compact circuit board saves space in embedded devices
  • Works with 1.8" Micro SATA SSD and standard mSATA drives
  • Plug and play installation requires no drivers

Caractéristiques

Aucune caractéristique publiée pour cet article pour l’instant.

Questions sur cet article

Does the 16-pin Micro SATA connector keep full SATA speed when the adapter is installed in a mini PC?

Yes, the 16-pin Micro SATA connector passes the native SATA signal through the board, so the drive runs at its normal SATA rate once seated in the mini PC.

Is the mSATA side limited to SATA I or does it support SATA III?

The mSATA interface on this card carries the same SATA signalling, so the link operates at whatever SATA revision the host and drive negotiate.

Will the board fit inside a 1.8-inch drive bay without blocking adjacent components?

The compact circuit board matches the 1.8-inch form factor, leaving enough clearance for tight drive bays and neighbouring parts.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.