저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

SMUGDESK

SMUGDESK 1.8 Inch 16Pin Micro SATA to mSATA Adapter Card

SKU CH-1G2V-JVGPM

Converts 1.8 inch 16Pin Micro SATA to mSATA for SSD use in compact systems

  • Bidirectional 1.8" Micro SATA to mSATA conversion
  • 16Pin Micro SATA connector ensures stable signal transmission
  • Compact circuit board saves space in embedded devices
  • Works with 1.8" Micro SATA SSD and standard mSATA drives
  • Plug and play installation requires no drivers

Micro SATA to mSATA converter

This adapter card provides bidirectional conversion between 1.8 inch 16Pin Micro SATA and mSATA interfaces. It lets you connect a Micro SATA SSD to an mSATA slot or an mSATA drive to a Micro SATA port. The compact board fits embedded devices and mini PCs. No drivers are required for operation.

Builders with mixed SATA form factors

Suits technicians who must link 1.8 inch Micro SATA storage to mSATA sockets in industrial equipment or compact computers. Buyers who need a SATA-to-PCIe bridge or a converter for a different interface cannot use this product. It addresses only the two listed SATA variants.

16Pin Micro SATA connector

The card uses a standard 16Pin Micro SATA connector for stable signal transmission. This pin count matches the 1.8 inch Micro SATA specification and determines whether your drive will seat correctly. Verify that your SSD presents the same 16Pin layout before purchasing.

주요 특징

  • Bidirectional 1.8" Micro SATA to mSATA conversion
  • 16Pin Micro SATA connector ensures stable signal transmission
  • Compact circuit board saves space in embedded devices
  • Works with 1.8" Micro SATA SSD and standard mSATA drives
  • Plug and play installation requires no drivers

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

Does the 16-pin Micro SATA connector keep full SATA speed when the adapter is installed in a mini PC?

Yes, the 16-pin Micro SATA connector passes the native SATA signal through the board, so the drive runs at its normal SATA rate once seated in the mini PC.

Is the mSATA side limited to SATA I or does it support SATA III?

The mSATA interface on this card carries the same SATA signalling, so the link operates at whatever SATA revision the host and drive negotiate.

Will the board fit inside a 1.8-inch drive bay without blocking adjacent components?

The compact circuit board matches the 1.8-inch form factor, leaving enough clearance for tight drive bays and neighbouring parts.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.