Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

SXDOOL

SXDOOL PVA120G12U 120mm 12025 PWM case fan

SKU CH-8VQH-NMA8C

A 120 mm PWM case fan with a 25 mm frame, four-wire connector and 12 V 0.75 A power draw

  • TypeCase Fan
  • 120 mm frame fits standard case mounts
  • 25 mm depth suits typical clearance
  • PWM 4-pin header enables speed control
  • 12 V 0.75 A rating delivers reliable airflow
  • Foxconn build quality supports continuous operation

Foxconn 120mm PWM case fan

The Foxconn PVA120G12U is a 120mm square frame case fan measuring 25mm thick. It runs on 12V DC at 0.75A and uses a 4-wire 4-pin PWM connector for speed control. This unit is built for standard chassis cooling positions.

Suits builders fitting a single 12025 PWM slot

It fits any case or cooler mount that accepts a 120mm x 120mm x 25mm fan with a 4-pin header. It is not suited for builds that require 3-pin voltage control only, smaller frame sizes, or thicker bay depths.

4-pin PWM connector decides compatibility

The 4-wire 4-pin interface is the single specification that determines whether this fan can be used. Your motherboard or fan controller must provide a matching 4-pin PWM header for full speed regulation.

Privalumai

  • 120 mm frame fits standard case mounts
  • 25 mm depth suits typical clearance
  • PWM 4-pin header enables speed control
  • 12 V 0.75 A rating delivers reliable airflow
  • Foxconn build quality supports continuous operation

Specifikacijos

TypeCase Fan

Klausimai apie šią prekę

How do I connect the 4-pin PWM connector to my motherboard and which orientation mistake should I avoid?

Align the keyed notch on the 4-pin plug with the tab on the motherboard header and press straight down; forcing it backwards bends the pins and disables speed control.

What part of the fan will wear out first and when should I plan to replace it?

The sleeve bearing inside the motor is the wear item; expect replacement when noise rises or RPM drops below the rated speed.

At what power draw does the fan hit its thermal limit during continuous operation?

The 12 V, 0.75 A rating sets the ceiling; sustained loads at that draw will eventually trigger the motor’s over-temperature protection.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.