Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

SXDOOL

SXDOOL PVA120G12U 120mm 12025 PWM case fan

SKU CH-8VQH-NMA8C

A 120 mm PWM case fan with a 25 mm frame, four-wire connector and 12 V 0.75 A power draw

  • TypeCase Fan
  • 120 mm frame fits standard case mounts
  • 25 mm depth suits typical clearance
  • PWM 4-pin header enables speed control
  • 12 V 0.75 A rating delivers reliable airflow
  • Foxconn build quality supports continuous operation

Foxconn 120mm PWM case fan

The Foxconn PVA120G12U is a 120mm square frame case fan measuring 25mm thick. It runs on 12V DC at 0.75A and uses a 4-wire 4-pin PWM connector for speed control. This unit is built for standard chassis cooling positions.

Suits builders fitting a single 12025 PWM slot

It fits any case or cooler mount that accepts a 120mm x 120mm x 25mm fan with a 4-pin header. It is not suited for builds that require 3-pin voltage control only, smaller frame sizes, or thicker bay depths.

4-pin PWM connector decides compatibility

The 4-wire 4-pin interface is the single specification that determines whether this fan can be used. Your motherboard or fan controller must provide a matching 4-pin PWM header for full speed regulation.

Puncte forte

  • 120 mm frame fits standard case mounts
  • 25 mm depth suits typical clearance
  • PWM 4-pin header enables speed control
  • 12 V 0.75 A rating delivers reliable airflow
  • Foxconn build quality supports continuous operation

Specificații

TypeCase Fan

Întrebări despre acest articol

How do I connect the 4-pin PWM connector to my motherboard and which orientation mistake should I avoid?

Align the keyed notch on the 4-pin plug with the tab on the motherboard header and press straight down; forcing it backwards bends the pins and disables speed control.

What part of the fan will wear out first and when should I plan to replace it?

The sleeve bearing inside the motor is the wear item; expect replacement when noise rises or RPM drops below the rated speed.

At what power draw does the fan hit its thermal limit during continuous operation?

The 12 V, 0.75 A rating sets the ceiling; sustained loads at that draw will eventually trigger the motor’s over-temperature protection.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.