Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Square black frame fan with four-pin connector and centre label

SXDOOL

SXDOOL PVA120G12U 120mm 12025 PWM case fan

SKU CH-8VQH-NMA8C

A 120 mm PWM case fan with a 25 mm frame, four-wire connector and 12 V 0.75 A power draw

  • TypeCase Fan
  • 120 mm frame fits standard case mounts
  • 25 mm depth suits typical clearance
  • PWM 4-pin header enables speed control
  • 12 V 0.75 A rating delivers reliable airflow
  • Foxconn build quality supports continuous operation

Foxconn 120mm PWM case fan

The Foxconn PVA120G12U is a 120mm square frame case fan measuring 25mm thick. It runs on 12V DC at 0.75A and uses a 4-wire 4-pin PWM connector for speed control. This unit is built for standard chassis cooling positions.

Suits builders fitting a single 12025 PWM slot

It fits any case or cooler mount that accepts a 120mm x 120mm x 25mm fan with a 4-pin header. It is not suited for builds that require 3-pin voltage control only, smaller frame sizes, or thicker bay depths.

4-pin PWM connector decides compatibility

The 4-wire 4-pin interface is the single specification that determines whether this fan can be used. Your motherboard or fan controller must provide a matching 4-pin PWM header for full speed regulation.

Pluspunten

  • 120 mm frame fits standard case mounts
  • 25 mm depth suits typical clearance
  • PWM 4-pin header enables speed control
  • 12 V 0.75 A rating delivers reliable airflow
  • Foxconn build quality supports continuous operation

Specificaties

TypeCase Fan

Vragen over dit artikel

How do I connect the 4-pin PWM connector to my motherboard and which orientation mistake should I avoid?

Align the keyed notch on the 4-pin plug with the tab on the motherboard header and press straight down; forcing it backwards bends the pins and disables speed control.

What part of the fan will wear out first and when should I plan to replace it?

The sleeve bearing inside the motor is the wear item; expect replacement when noise rises or RPM drops below the rated speed.

At what power draw does the fan hit its thermal limit during continuous operation?

The 12 V, 0.75 A rating sets the ceiling; sustained loads at that draw will eventually trigger the motor’s over-temperature protection.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.